Howto request: BWM for IPSec/L2TP/VPNs

mMontana

This howto

https://mysupport.zyxel.com/hc/en-us/articles/360010431759--ZyWALL-USG-How-to-configure-BWM-QoS-on-Zyxel-firewalls

reports how to configure specifically VoIP/SIP rule for BWM. Mostly can be replicated with some other considerations for other services/applications/service group.

Fine.

What about create a proper, working and correct rule for VPNs connection? My goal is to reserve some traffic to the connections, slowing other traffic when needed.

Currently I can only reserve traffic in/out/ for in-tunnel application, but if the tunnel is "costrained" by other data flows… i cannot preserve tunnel bandwidth?

I mean.. delay downloads/uploads of file to internet might be lower priority than allow smooth experience on traffic via VPN…

Zyxel_Jeff

Hello @mMontana

Thank you for your further inquiry. May we know if you want to apply Bandwidth Management (BWM) for IPSec/L2TP/VPN-related traffic and prioritize those traffic when you need it?

mMontana

I'd love to reserve for a specific tunnel (6 are built, with different gateways) enough bandwidth to have stable dehaviour.

If not possible the single tunnel, at least the gateway.

Zyxel_Jeff

OK, noted it. Please let us clarify it internally.

mMontana

If you have any question or… explaination, feel free to ask

mMontana

Up.
Willing to share any status or possible ETA? :-)

Thanks.