-
Seriously, your ideas could be new feature for WirelessLAN!
Hello WLAN Forum Members, Do you have moments that if your own thoughts or ideas can make better experience when using Zyxel WirelessLAN products? <3 We can make your wish come true! <3 Simply start a new post here describing your fabulous ideas for features or services you wish to have! Once your ideas get lots of vote ,…
-
AP controller (USG FLEX H) different AP groups can apply the same SSID setting
User @Matthew hopes AP controller (USG FLEX H) different AP groups can apply the same SSID setting. Anyone likes this idea, please leave your comment below and give it a vote! Original link
-
Accented characters in SSID
Hello, I'm deploying NWA50BE in France in an installation using a router from Orange where it is possible to have accented characters in the SSID - e.g. <l'archiprêtré_invités> It would be good to be able to use the same SSID on the AP. Best. -Graham "l'archiprêtre" -
-
Support Remote AP Ethernet Secure Tunnel for BE APs with LAN Ports
User @GiuseppeR plans to deploy several BE APs, some of which have LAN ports. However, these BE AP models do not support the Remote AP Ethernet Secure Tunnel feature. Thus, here to propose adding support for Remote AP Ethernet Secure Tunnel on BE AP models. This suggestion originated from the post found here: Remote AP…
-
Detected nearby AP's list with signal strength
We have several WAX650S in use in various locations. Some are in dense areas with other AP's from neighbours. While we can "see" this nice list of detected AP's, there's no measured signal strength (min, max, average) that could help with manual channel settings on our AP's. We forced to use a separate device to measure…
-
Blocking devices that use Randomized MAC Addresses to connect to SSID
I will block devices that are connected to an SSID that they are not supposed to, but because they have randomization turned on, they can get a fresh MAC address and reconnect. Devices are BYOD so I can't force people to turn it off in their settings.
-
Nebula P2P link with greater range (directional)
It would be great if Nebula released a P2P Wireless bridge, or even a directional antenna kit for NWA55AXE to increase the range of a P2P wireless bridge. I am not sure if WiFi band is up to the task, but anything that could be managed by Nebula and has more range than the current NWA55AXE would be fantastic. I wonder if a…
-
Adding SNMP feature on NWA50AX
Users @write4nik and @TomasHujcakZILLION have proposed the idea of adding SNMP functionality to the NWA50AX. https://community.zyxel.com/en/discussion/21571/how-to-enable-snmp-ap-nwa50ax If you're also keen on seeing this feature implemented, we encourage you to show your support by voting for this idea.
-
Zyxel WAX300H Uplink Port
I would like to see the uplink port on the back of the device so if installed on a wall plate the uplink cable is unseen in the wall.
-
Zyxel access point supports WPA3 Transition Disable feature
User @horse31 hopes NWA50AX supports WPA3 Transition Disable feature. Anyone likes this idea, please feel free to leave your comments and give it a vote. Origninal post
-
Wifi Access points with Thread border router and AirTag support
We're currently using the WAX650S access points on a large property with several houses for recreation. They work great, especially when all wireless clients are wifi 5 or better. We also have a share of home automation that partly uses Apple's HomeKit and the more open Matter protocol for other 3rd party automations.…
-
Adding the Option to Disable OFDMA
User @jpblanch75 suggests adding an option to disable OFDMA on access points. This feature would enhance compatibility for Wi-Fi 5 and Wi-Fi 6 devices connecting to the AP. This idea originated from the following discussion: https://community.zyxel.com/en/discussion/comment/71602#Comment_71602 If you support this idea,…
-
No default set to open without a random password on all AP shipped
So found out the embarrassing way when checking my traffic the short of it is I setup a AP as Repeater it was on the guest network so its isolated but still can't believe I made this mistake that can happen very easily due to the default set to open and when you make the SSID it set to use the default for Security Profile.…
-
Station information can display the IPv6 information
User @CecilWard hopes the station information can display the IPv6 information. Anyone who likes this idea, please leave your comment or give it a vote. Original post
-
Hope the web GUI of the access point can support iOS
User @CecilWard hopes the web GUI of the access point can support iOS. When he uses an iOS device, like the iPad, he cannot find the full information from the station information. Anyone who likes this idea, please leave your comment or give it a vote. Original post
-
Ability to customize country code after setup via Wizard
In response to the requirements raised by user @mMontana, we propose allowing the editing of the device’s country code in the web configurator interface even after the initial setup via the wizard. Additionally, we propose enabling the editing of other parameters in the web configurator that can also be set up through the…
-
Ability to customize profile names after setup via Wizard
In response to the requirements raised by user @mMontana , we are considering changing the spec that allows customization of profile names after the initial setup using the Wizard as the SSID profile name, Security profile name, etc. This suggestion originated from the discussion found here:…
-
Addition of Channel Utilization OID for SNMP use
In response to the requirements raised by user @rwhitton, we propose the addition of Channel Utilization OID for SNMP use. This suggestion originated from the discussion found here: https://community.zyxel.com/en/discussion/20477/channel-utilization-missing-from-the-snmp-mib If anyone likes this idea, please feel free to…
-
Enhance the L2 isolation
Hi! I would like to suggest an enhancement to the L2 isolation feature. Current implementation allows one to see the devices on the same local network(if you use a scanning tool on windows such as as Angry IP scanner, nmap on Linux or network tools on an Android/iOS device). I am aware that L2 isolation does not allow…
-
NWA50AX logging is buggy
Not sure if it fits the topic, but there is no general "bug" forum here. The CEF formatted messages of the NWA50AX are a paint to parse – like many logs of Zyxel devices I might add! <141>May 21 01:30:26 NWA50AX_A CEF:0|Zyxel|NWA50AX||0|System Monitoring|5|src=0.0.0.0 dst=0.0.0.0 spt=0 dpt=0…
-
RADsec for radius
Please add radius support for RADsec, radius via TCP/TLS instead of UDP.
