-
ZON support for Mac Sonoma
-
Zon support
will Zon support be available for Mac Sonoma for the switches?
-
USG20-VPN Console cable pinout
Hello, I own a USG20-VPN firewall, and I want to connect its serial port to my Moxa device (out-of-band network). The issue is that Moxa rj45 pinout is not the same as let's say Cisco's, or other vendors, which means that I always have to build my own serial cables, and that I cannot use the one that shipped with my Zyxel…
-
Log Report
Hi everyone, I continue to receive dozens of emails from an ATP500 even though the sending of logs in the PolicyControl is not enabled, even sending emails is not enabled from Secureporter. How can I find the source of these emails? Thanks for your help.
-
Howto request: BWM for IPSec/L2TP/VPNs
This howto https://mysupport.zyxel.com/hc/en-us/articles/360010431759--ZyWALL-USG-How-to-configure-BWM-QoS-on-Zyxel-firewalls reports how to configure specifically VoIP/SIP rule for BWM. Mostly can be replicated with some other considerations for other services/applications/service group. Fine. What about create a proper,…
-
VLANs FLEX 200 + XGS 1930 + HP Switch
Hello, how can i setup a 3 Vlan - VLAN1 (private) VLAN20(guest) VLAN30 (TV spot) VLAN1 (DHCP - 192.168.232.1) - i whant to see all servers and clients VLAN20 - This is isolated clients (DHCP 192.168.50.1) but can see PC and TV from VLAN1 VLAN30 (DHCP 192.168.100.1) - isolated TV, but can see PC and TV from VLAN1 I have…
-
USGFlex200 Enable IP Blocking For External DB alert but don't block !
In our USGFlex200 with Gold Security Pack, we use an "External IP Block List". Logs alert us about "Malicious Connection" based on "Ip Reputation" but don't block connections !!! (Access Forwarded). What is wrong ? Firmware version is V5.37(ABUI.2). Thanks for help
-
No traffic in VPN IPSec Site-to-Site
Hi, I need to setup a IPSec Site-to-Site VPN with a third party. We use a Zyxel USG, while the third party device is unknown. My local lan is 192.168.1.0/24 , in the vpn settings the Local Policy is 10.9.230.144/29 and the Remote Policy is 172.16.0.0/12 I followed this and this guide, the VPN connection is established, but…
-
USG 110 to USG Flex 200
Good evening everyone Recently I had to replace a USG 110 and chose the USG Flex 200. According to the USG Configuration Converter, you can only convert the USG 110 to the Flex 500 and not to the Flex 200. But the USG Flex 500 would be overkill for 2 people. Is there a way to convert my USG 110 configuration for the USG…
-
Problem with VPN configuration for Android 12 and above
Hi, We have ATP100 (version: V5.38(ABPS.0)). We are unable to configure VPN connection using IKEv2. It is unable to start VPN connection. The following message appears. Here is our VPN connection and VPN gateway setup. We have a public IP address. I have one more question, is there another connection option for Android 12…
-
Port mirroring feature
Hello, I can't find any reference guide to port mirroring in a USG FLEX 700. Can anyone confirm if this is even possible? Thanks in advance. Regards
-
Routeing rules not failing correctly if interface ping is enabled
VPN300 V5.37(ABFC.2) so this is the setup only with more rules When without VPN300 interface ping check on VLAN443 on Zywall 110 I block from VLAN443 to VLAN443 the rules disable correctly then when I remove the block the rules come back on line. But if I have VPN300 ping check on interface VLAN443 to no-ip.org and…
-
Why has the geoip update policy changed?
Hi Zyxel team. Previously, I asked questions on this community forum about the geoip update. I was told the Geo IP database would not change frequently. I had one or two updates per week on USG20W-VPN, now it's been more than a month that the database has not changed without error message, it's just "up to date". Why this…
-
VPN SSL Velocidad transferencia archivos muy lenta
Hola, Tengo un Zyxel ATP100 con VPN SSL configurada y clientes Windows 10 con el software SecuExtender de Zyxel para conectar a la VPN SSL. Al intentar transferir desde cualquier PC Cliente conectado a la vpn SSL, la velocidad es terriblemente lenta. Teniendo en cuenta que todos mis usuarios suben archivos que pueden ser…
-
Disclaimer only in UAG4100 / Nutzungsbedingungen
Hallo, Ich weiß, die UAG4100 ist schon alt und jahrelang hat sie gut funktioniert, indem sich jeder Benutzer über Web-Authenifizierung anmelden musste, also Name, Passwort, Bedingunge zustimmen, fertig. Nun wurde entschieden, das Name und Passwort wegfallen sollen, nur noch den Nutzungsbedingungen soll zugestimmt werden.…
-
USG Flex 200 doesnt allow windows 11 IPSEC Phase 1 conection
Hi my USG Flex was configured for low security ipsec vpn with linux clients USG Flex 200 doesnt allow windows 11 IPSEC Phase 1 conection: "Recv IKE sa: SA([0] protocol = IKE (1), AES CBC key len = 256, HMAC-SHA1 PRF, HMAC-SHA1-96, 384 bit ECP, AES CBC key len = 128, 256 bit ECP, 2048 bit MODP, 3DES, 1024 bit MODP, HMAC-MD5…
-
Permitir WEB
Estoy oniendo en las páginas permitidas una url, para que podamos ver dicha ppágina, pero no la desbloquea. *.gloria.* Gracias
-
hello there
If i want to reach other subnet (subnet beyond Firewall) through ssl vpn session but not internet, how to do it; my firewall is usgflex 500 Thanks in advance
-
Site-to-site USG FLEX500 - Strongswan
Hi, we had lot of routers (kerio, unifi, etc..), on each router we had set up IPsec tunnel to our datacenter. In datacenter we have Debian server with Strongswan (it has public IP). Always I set up on Debian remote and local network and on router remote and local sites too. Now we bought flex 500 and I need set up the same…
-
USG20 W VPN Access Point geht nich mehr
Guten Tag Gestern habe ich auf meiner USG20W VPN auf 5GH WLAN gewechselt, danach wieder zurück auf 2.4 GH, seither geht das WLAN gar nicht mehr, die LED WLAN leuchtet jeweils nur kurz beim Booten auf danach nicht mehr. Eine uralte Konfiguration dort funktioniert das WLAN. Leider zeigen die Logs nichts an was mir hilft.…
