-
Will Microsoft Store be added to App Patrol ?
Will the Microsoft Store be added to App Patrol? Looking for a way to block the store without blocking microsoft updates. Or is there a good way to use content filter policy and block domains for it? At one time, blocking storeedgefd.dsx.mp.microsoft.com store-images.s-microsoft.com officeapps.live.com domains blocked the…
-
Traffic Monitoring to and from specific device
Hi to all, I would need to know if there is a rule to monitor traffic to and from a specific device. I used the explanations on the page below as a basis but when I run a Ping test I get no monitoring. Below my Rule. What I need is to monitor all traffic to and from a specific device across the entire network and not just…
-
Security updates to the VPN100 device
Hello, a new organization we are working with has a Zyxel VPN100 firewall, I see that it wen end of life for "vulnerability support" about 6 months ago, yet it received an update this month. What is the status on security patches for the device? Can they keep using it for the short term and expect updates?
-
How to configure 6in4 tunnel with Hurricane Electirc on USG 50?
I have a very old product - USG50 and would like to configure the 6in4 tunnel over PPPoE, but never got it successfully. I read the article below, but my LAN client still can't get the IPv6 address and HE tunnel seems not working. Can someone teach me how to make it successfully? he: Tunnel: LAN: Static route:
-
IPSec NATT (udp4500) ADP false udp filtered distributed portscan Action
ATP500 fw v5.35 I have logs of ADP: from WAN to Any, [type:Scan-Detection(49)] udp filtered distributed portscan Action:Drop Packet Source: {vpn.client.IP}:4500 Destination: {wan.IP}:4500 That logs are with every VPN access connection (L2TP over IPSec with PSK - Windows native client) I have already changed sensitivity of…
-
IPSecVPN - Cannot ping remote IP range
I have a Zyxel 1100 at SiteA and a USG 220 at SiteB. I used the wizards to congifure my site to site IPSecVPN and it's working in that it came up immediately on both sides. My problem is I cannot ping any IP addresses on either side. I can't even ping the Zyxels on each side. Both devices are new and I have not cluttered…
-
VPN100 Routing Policy conflict problem
Hi, We have got two different Internet from different providers and we are using for Teams, Skype and Google VOIP only WAN2. Rule looks like: User (any) Incoming(lan1) Source(any) Destination(Microsoft) Next hop(wan2_ppp) We have got some Microsoft teams problem but we have configured the policy correctly. When I do…
-
usg flex 100 pppoe on opt-wan
-
Hard reset usg20w-vpn
Hello, Unless I'm mistaken, it seems to me that when a usg is first commissioned, the router is loaded with "minimal" firmware and downloads the latest standard firmware. When I reset my usg20w-vpn, I find remnants of previous configurations, such as a personalized home page with an image. I'd like to know if there's a…
-
Where to download old Firmware versions? Is there a new FTP site for Firmware download?
I understand that ftp://ftp.zyxel.com site is no longer available. Where can we find firmware versions that are not found at the MyZyxel portal? I need the ZLD4.62 Patch0, for a USG 210 Zywall, but have no idea where to look for. Thanks!
-
Upgrading USG 20 from 3.30(BDQ.7) to latest
I have a USG 20 in use that I need to upgrade, if possible. Is this still supported or is it out of the question to upgrade to a current firmware? Let me know what other info is needed.
-
USG20-VPN Cant register on Nebula
Hi! I recently purchased a 2nd hand USG20-VPN. I want to use Nebula since it is easier to manage. I registered the device on myZyxel portal and added the device on Nebula Cloud service. The device is in Nebula mode(see the attached image) but Nebula still waits for ZTP(see the attached image). The device is running the…
-
VPN ikev2 ok, but don't work folders shared
HI,I have established an IKEv2 dynamic VPN between a USG FLEX 200 and a Windows 11 professional client and the tunnel works.What doesn't work is connecting the network drives and the various sql management systems with windows authentication.I tried to specify the DNS and the suffix, the server addresses are resolved, but…
-
File transfer over SSL VPn extremely slow (USG FLEX 500)
Hello, we have a USG FLEX 500, when we connect through SSL VPN, the speed of transferring files from a Windows file server to a Windows machine is extremely slow, reaching an average of 500Kbps, taking approximately 50 minutes to transfer one 179Mb file. I emphasize that there is no bandwidth control configured on the…
-
Website Blocking Issues
I am trying to access a website we use and I keep getting an error. This started happening once I installed the Zyxel USG 700 that I am using now. I can not see anything in the logs for why it may be being blocked, but I came to the conclusion it is the router because I can get on another network, outside of the router,…
-
Single Sign-On (SSO) with an ATP 200 with no Win Server?
Hi Sry its in German: But the wrote who to use them with a Win Server who I dont have. I tought about use 2 Raspberry Pi one as active one as passive if the fail I need to be login. Is there some information how to do it? Are there some open Source ways to do it? Thanks!
-
VPN access through IPSec VPN client to a specific address using username/password on ATP200.
Hi all, I am in need to let a customer to connect to a specif server with a static address inside my network, and to not permit any other access inside the network. The client will be Zywall IPSec VPN client and my Firewall/router is the ATP200. Could you please tell me if is possible this configuration, and if yes, how I…
-
VPN not working any more after reboot
I don't know what it is, but my Flex200 seems haunted! It was up for 3 months and today I reboot it and suddenly two VPNs are not working any more. That's especially "great" since it's the last day of the month any everyone needs to enter their hours for billing… The two failing VPNs are IKEv2 with certs. I have a 3rd,…
-
How to setup for site to site with VPN and both sites have same subnet
Site A and B can connect to each other using a fake IP subnet to map to from real LAN subnet that are the same on both sites. From Site A 192.168.138.4 to 192.168.70.5 maps to 192.168.138.5 on site B From Site B 192.168.138.5 to 192.168.69.8 maps to 192.168.138.8 on site A SSL VPN From site A 192.168.141.4 to 10.255.255.3…
-
Where are the Firmware Updates for FLEX 500H ?
I cant find any firmware updates for the Flex 500 H - Firewall. There is a product FLEX 500 but not FLEX 500H in the list.
