AHGJSoree

Hi, I am having the same issue on a ATP500. When SSH'ing into the system disk 1 (image) is 232MB and 48% in use. Flash is 2015MB and 18% in use. The new firmwar shoud fit as there is still 111MB left in image I guess. The new FW is 101MB in size. What else could be the problem?

in USG20W-VPN (5.30 ABAR.0) -> 5.36(ABAR.2) - Firmware not compatible Comment by AHGJSoree July 2023

Hi, We are currently changing our subnet from 192.168.220.0/24 to 172.16.127.0/24. We are using an old USG310 still so adding an extra IP address as a gateway is an easy way. The USG310 then acts as a default gateway with both subnets. This is an easy quick approach. Jeroen

in Virtual LAN interface in Nebula ATP200 Comment by AHGJSoree June 2023

Hi, I have replied to you in ticker number #230400896. Did you get this response? If so we need to close this thread on this platform? 🙄 Jeroen

in Site-to-Site VPN between ATP200 and Cisco ASA 5516 Comment by AHGJSoree April 2023

Hi, I have changed the mask to be smaller and thus the range bigger. Not very ideal but it will work for now. How would that be when using a USG as a concentrator with more than 8 attached firewalls? But hey, it's solved. Jeroen

in No more than 8 networks in SSL VPN Comment by AHGJSoree March 2021

Hi, 1 - Model is Zywall310. 2 - Firmware is 4.62(AAAB.0). 3 - When adding the 8th network into the address objects the message as in the picture pops up. 4 - I have created the network subnets as address/subnet objects and then created an address group out of them. 5 - Screenshot included below.

in No more than 8 networks in SSL VPN Comment by AHGJSoree March 2021

Solved!

in Login goes to SSL session Comment by AHGJSoree January 2021

AHGJSoree Freshman Member

Comments