AlexandervonW  Freshman Member

Hi PeterUK, I thought so, but now you confirmed. Thank you very much. Have a nice day Alexander

Hi PeterUK, nice to hear from you again. I used another account with my last problem, the same topic with a new USG FLEX 200H. No, i did not try that in Neubla, i thought i ask first. As i wrote in my last comment on the USG FLEX 200H topic, i moved back to a ATP500 and there everything is working as it should. (Even the…

Hi Zyxel_Judy, yes, i know there is IP/MAC binding in Nebula, but is there also "DHCP Enforcement" enabled? Because that means, if i do not use for. ex. a DHCP server on that network, only known MAC addresses can have access to the network? Thanks for help Alexander

Hi PeterUK, many thanks for digging into that. Would i be 30 years younger, i would/could have helped you. ;) Meanwhile i have switched back to a ATP500 and all is fine there. Have a nice day Alexander

And, sorry, mind me asking, is the former option "Enable IP/MAC Binding and DHCP Enforcement" now gone? Or is it always active? Thats for a reply Alexander

Hi ZyxeL_judy, i have the firmware V1.20(ABWV.2) on the 200H. Your setup is right, minor difference is, that i set the DHCP range to f. 192.168.11.200 - 220 and the static ip i choose was 192.168.11.20. After a reboot, in this case a printer, the reservation on the printer was gone… So, is the "CO" behind your firmware a…

Hi PeterUK, many thanks for your answer. And, this is really stupid by design, because this is the easierst way to bring security to your network! Anyhow, i have decided to switch back to an ATP500 and the old firmware. Many thanks for your help Alexander

Hi Zyxel_Judy, no, you cannot! I did that, but after for. ex. restart of the device, which has a static ip in the way you wrote, it starts up with a self defined ip adrres (169.x.x.x)! Remember, the static ip has to be out of the DHCP range! Thanks for help Alexander