Antares3000  Freshman Member

If you want we can plan a connection to my pc and you can connect directly to the devices...what do you think about it?

Lan to Lan allow policy didn't work too. 

Layer 2 isolation already disabled Intra-BSS traffic blocking already disabled Any other idea to try?

I didn't use bridge mode and vlan. I used tunnel and i connected the 3 SSID to the different port of the different network. For now it works.

Point 1,3,4,5 are ok...we understood. Cannot understand exactly what you mean in point 2. Can explain better how to configure switch? Thks

SOLUTION: In ISP Account "Service Name" was not empty. Deleting the content it worked.

Follow the guide i posted. You will be able to enable LDAPS without problem. Than, download a ldap viewer. For example http://ldapadmin.org. In this way you will be able to check if everythink works fine with your LDAPS. The only things that is not clearly explained is that you have to be able to reach LDAPS. So you have…

I success configuring LDAP & AD AAA Server and Auth Method. Had to make lot of tes but it works

I also tried a simpler router...Zyxel NBG6615. Noway to connect using PPPoE. If i use other brands, no problem. Does Zyxel use a different PPPoE ???

Yes, it was what i did but seems that dosn't work with Zyxel. I also tryed with USG60W and i have the same problem

I did as you suggested. To test if i configured as well , i removed vlan from the router that provider gave to me (tplink). Than i tried to connect directly and didn't work. Than i connected tplink to configured vlan 835 switch and it worked. So i'm sure that switch is configured as well. So i connected my ATP700 instead…

《And keep in mind that UTM throughput is "only" 30 Mb/s》 I think that is your problem. I think no solution. Need a powerful device

I understood your idea. I didn t use switch in the middle. I connected atp700 pppoe interface directly to isp cable. Isn t it possible to make it works in this way? Do i need switch?

I already read that discussion. I used Azure AD DS to issue LDAPs. Azure side everything is clear and ok. I did like here: https://docs.microsoft.com/it-it/azure/active-directory-domain-services/tutorial-configure-ldaps However Zyxel side not clear. Don't know exactly the parameters to set. Don't know if certificate client…