AntonioR  Freshman Member

About

Username
AntonioR
Joined
Visits
10
Last Active
Roles
Member
Points
6
Badges
1
Posts
5

Comments

  • Hello, Jeremylin and Zyxel_Charlie, It's working fine. Thanks
  • Hi, Jeremylin, I changed the address of ge5. But I have a question: Do I map the same port (80) in router and USG? Or, Do I map a range of ports (example from 70 to 10000) in the router -not in USG- to address 192.168.3.41 (the address of ge1)? Thanks
  • Hello, Jeremylin, This is the interface screen. If ge1 uses DHCP, the router provides an IP address to ge1 and the connected PC in ge3, or the switch, can navigate with a browser. Can I use this configuration to map port 80? If I cannot use this configuration, I must try to put the router in brigde mode, isn't it? The ADSL…
  • Hi, Jeremylin: The topology of network you ask. Internet ---- router (ADSL static ip) --- P1 - USG310 - P3 --- switch no configurable ----LAN (the TCP port is of one pc in the LAN). I plug a pc in the router, the PC can surfing Internet, but If I plug the PC in the switch, the PC cannot navigate. My firrst and basic…
Avatar