Brackan

Comments

  • Good morning @martiko Yes, I have some good news. I got an update from the Zyxel support that solved the issue for me. The way NR2101 works is that it will bind the first device that connects after setting IP Pass-through in the settings UI. The binding seems permanent, even if you disable pass-through and enable it. What…
    in NR2101 IP Pass-through Comment by Brackan January 2023
  • FYI I've opened a ticket for this issue as well since it seems more of a bug than a config issue. I will report back on any progress. Happy new year 🚀🌈
    in NR2101 IP Pass-through Comment by Brackan December 2022
  • A picture showing actual and expected behavior.
    in NR2101 IP Pass-through Comment by Brackan December 2022
  • Thanks for the answer @tonygibbs16 You are describing my expected behavior. Currently when I put the device in IP pass-through I get IP addresses assigned by the NR2101 DHCP and the clients are NATed. If I disable the DHCP server i get no address assigned to clients on LAN. My conclusion is that the IP pass-through is not…
    in NR2101 IP Pass-through Comment by Brackan December 2022
  • Does it restart intermittently i.e. after 10-20 seconds of operation or does it go into a boot loop? Try running the device without battery with the provided charger and see if that works.
    in NR2101 keeps restarting even after reset Comment by Brackan December 2022
  • IMHO the port should not be exposed in the case it is not used.
    in NR2101 SSH Comment by Brackan December 2022
Default Avatar
EnglishTiếng ViệtРусскийไทย中文（台灣）