Greenlight  Ally Member

How those devices are connected each other? What's the Zyxel device you have? Since the ISP router subnet is 1962.168.0.1/24, which is different from 192.168.1.121, your PC/laptop can't access the zyxel devices. 1. You can first try to set fixed IP on your laptop with 192.168.1.X. 2. And then directly connect it to your…

@"My bmw" Frankly speaking, the theoretical Max. support client is way much higher than the "real" valid connecting clients (with data transferring). Which means if you really connect that amount of stations to Router: yes, they can connect, but some of them may suffer for bad wireless performance. So it's much better if…

How do you know / What's the "two" channels the Router uses? You can check "channel width" settings and set 20 MHz as the value.

I've test with my another Win10 laptop, The resolution is good without any error. My screen resolution is 1366x768, for your reference.

There is also no full screen mode in my Windows 7 laptop, seems it's the software design.

There are lots of approaches to achieve this, but the most simple way is to configure your home router, where you can set different SSID name on 2.4GHz and 5GH. This way you can directly identify them on your nodes Wi-Fi list.

I remember there's no such setting on Zyxel APs. There's a similar function called "Allow 802.11n/ac/ax stations only" (under radio setting > show advanced functions), but still differs from the "airtime fairness". My recommendation is, when legacy/updated stations co-exist in the same environment, use 2.4GHz radio for…

Two settings on Nebula can be applied in your case: 1. For the WDS setting, you can enable the "Smart Mesh" function, which is under the "AP & Port Settings" directory. However, in Nebula I don't find any place to set the WDS link in specific radio (2.4/5 GHz). 2. For The SSIDs setting, in order to show them on particular…

Just wonder if this could be the powerline issue? for some powerline adapters have their own power saving mechanism, where uplink will be auto disabled when there's no outgoing traffic for a period. Maybe next time you can try to pull out and plug in the cable between AP and Powerline device instead of rebooting AP, and…

You may use the "support request" function on Nebula Control Center to directly contact with Zyxel. They may check your settings and solve your problem. BTW, just saw the log time is at 12/17, so when you contact with Zyxel, you'd better tell them how's the AP's status after that time, so they can quickly understand your…

In my using experience, enabling 802.11k/v won't affect my unsupported devices(Ex: Sony smartphone). Check the standard flow, you'll find both standards just allow AP to "recommend" some support candidates to wireless station. And station can decide whether to adopt or ignore that list. (Furthermore, the above process…

It seems the Mesh can be only established within products of the same brand. For each vendor has their proprietary method to establish connections between APs. In the Keenetic article it also mentioned the router can only manage additional "Keenetic" devices. The mesh function on Nebula is called "smart mesh",you can use…