JasonTsai  Zyxel Employee

Hi @Eddwood , For your scenario, since you have several SSIDs in different VLANs, we recommend you configuring VLAN Trunking feature on the port that connects to AP and the uplink port of the Switch. When you enable VLAN Trunking, you don't need to configure any new VLAN for SSIDs, those VLAN traffic from AP will pass…

Hi @danyedinak , Thanks for following up on this. Although we understand the benefit of offering SSH public key authentication and we’ve already add it to our roadmap, the availability has been pushed out several times due to more urgent project demands.

Hi @D_Shadow, GS1900 V2.40的韌體已經發布了! 歡迎到以下的官網連結下載新韌體: https://www.zyxel.com/tw/zh/support/download_landing/product/gs1900_series_12.shtml?c=tw&l=zh&pid=20130521174809&tab=Firmware&pname=GS1900%20Series Cheers.

Hi @Veit, We have an internal meeting to evaluate this idea, and this feature is now in Zyxel future roadmap. Thanks for your advice.

Hi @ErneX, Welcome to Zyxel community. I will PM you the beta firmware. Thanks.

Hi @Leif_Burlin, Welcome to Zyxel community. I will PM you the beta firmware later. Thanks.

Hi @Veit, Uploading .rom file to XGS2210 series via SFTP/FTP is the way to reset the configuration to factory default. After uploading the .rom file successfully, the Switch needs a reboot to complete the "reset factory default". XGS2210 series has dual ROM, but the uploading place is according to the running ROM.…

Hi @Veit, Sorry for the late response. I have reproduced the same symptom on my XGS2210-28HP via SFTP by using Linux OS. Our internal team will verify it and I will update on the forum once I get the result. During this time, hope you may use HTTPS first to restore your configuration. Thanks.

Hi all, Thanks a lot for all of your cooperation. :) We finally fix this issue and we will release a new official firmware including this around May. I will update on the forum when it releases. If any other user meets the similar issue before the official release, please contact me and I will provide you the Beta firmware.

Hi @DanZyw, It seems like you meet the problem on ZyWALL 110. For this case, @Zyxel_Charlie will help you for details, so this topic will be moved to Security Discussion Section. Thanks.

Hi @Veit, Welcome to Zyxel community. I have followed your description on my XGS2210, the following is my screenshot: (I use SFTP via Windows cmd ) I create VLAN 2 in the backup configuration and restore it back to the switch via SFTP. I also connect a console cable from my PC to the switch, the following is what I see…

Hi @DanZyw, Did you save the configuration this morning? The time of "Config last updated" will follow the last time you save the configuration. Here is my screenshot: * Backup before saving the configuration * Backup after saving the configuration Hope it helps.

Hi all, Thanks for @hopkins35 's information. If you have the similar problem when upgrading from old beta version to latest beta version, please follow the procedure below to recover. * Backup the running-config.(Maintenance -> Configuration -> Backup) * Open it via "Notepad++" (Freeware, Download link:…

Hi @hopkins35, Since you have LAG connection on your switch, I also configure LAG in my local test. Here is my topology: [GS1900-8] Port 1---Switch [GS1900-8] Port 2---GS1900-24E(LAG2) [GS1900-8] Port 6---GS1900-24E(LAG2) [GS1900-8] Port 7---PC(iperf3 server) [GS1900-24E] Port 9---PC2(iperf3 client) Here is my screenshot…

Hi @hopkins35, I have a local test with iperf3 on PCs and GS1900-8 upgrades to the beta firmware, but I don't have the symptom you mentioned. My topology: [GS1900-8] Port 1---GS1900-24E(I configure speed 10M like yours.) [GS1900-8] Port 5---PC [GS1900-8] Port 8---PC Here is my screenshot in my test: If there is anything…