Lukasz

Comments

1. Yes, I did. 200.126.100.0 is reachable over VPN.2. I have two policies on the non-nebula device, one for 200.126.100.0/24, second for 200.126.10.0/24 (I'm sorry, my mistake in the first post, VLAN is 200.126.10.0/24). 2. Advantech ICR-160.

in NSG VPN VLAN no connection Comment by Lukasz April 2021
Jonas, It was verified, there is no ICMP block, the policy route is configured. Unfortunatelly the tunnel was not stable. But we just close the site POZ-Lawica for now. But I have the same issue with a next nonNebula peer (ELEKTR_POWISLE). Exacty the same symptoms. I wondering if I can switch off the connectivity-mechanizm…

in [NEBULA] Non-Nebula Peer and NSG200 IPSec disconnects constantly Comment by Lukasz June 2020
Jonas, There is no icmp blockade on site POZ-Lawica, either on LAN and WAN interface. Also in case the tunnel is established for 30 sec I should be able to ping from POZ-Lawica to NSG within this time window, shouldn't I ? Lukasz

in [NEBULA] Non-Nebula Peer and NSG200 IPSec disconnects constantly Comment by Lukasz April 2020
Hi Jonas, Both sites are now enabled. Lukasz

in [NEBULA] Non-Nebula Peer and NSG200 IPSec disconnects constantly Comment by Lukasz April 2020
Hi Jonas, APCOA_PL/WAW_CONTROL_ROOM The Zyxel Support is active now. Lukasz

in [NEBULA] Non-Nebula Peer and NSG200 IPSec disconnects constantly Comment by Lukasz April 2020
Yes, I see something like enclosed.

in [NEBULA] Can I establish 2 or more simultaneous connection over IPSEC/L2TP ? Comment by Lukasz February 2019