Nakyll  Freshman Member

ok got it thanks, i 'll creat a persistent route on the target ip.

Hello, thanks for your help, Router# show fbwifi statusActivate: yesConfigure link: https://www.facebook.com/wifiauth/config?gw_id=412476987128595Paired: yesIdle detection: yesIdle timeout: 60Security ploicy: high as you see it's correctly paired https://www.facebook.com/casadicuramariarosaria our business page...I'am not…

I have no answare from Web Auth... I tryed also on a VPN20 same results. I used a clean Lan 2 with Dhcp .. (no vlan at this time) enabled fb wifi paired the page enabled web auth and built the policy trom lan 2 to any force fb auth.... etc but no redirect on the captive .... i've same issue on usg110 and this one .....…

Hello, when i enable Web Auth for redirect My Vlan10 ips to force webauth i got rejected traffic from vlan10 (ip) to any in logs , where is the problem , i can't finde it

Any ideas?

Hello, my l2tp Work perfectly under firmware versione 4.25 with a radius server and OTP account! if I upgrade to new firmware connection goes UP but no traffic in the tunnel! (tryed also to bypass the radius server working on locally account) This is the route on 4.25. Tryed to make route also from lan1 to tunnel with…

Sorry for my bad english!!! Tunnel is UP, but i can't connect from l2tp range ip pool to Lan1. with the old firmware all is ok. If I upgrade after the versione 4.25 no way to allow traffic