Nikki  Freshman Member

Hi Sir, For P874 functions, please contact with your ISP first.

Hi Xojiakbar, I will suggest you to contact with ZYXEL local support team or sales in Russia. And probably they might ask your ONT model/ FW version and also OLT FW/ configuration/ scenario. For IGMP snooping, I think you will need to configure mcast-channel on OLT and also configure igmpchannel under ONT uniport on OLT.…

Hi Alek, For request the latest FW version of any ZYXEL device, suggest to contact with their local support team or reseller. Hope the information is useful. Cheers,

Hi Antonello, It might related to OLT setting which control by service provider. Suggest you to contact with service provider to get the help. Cheers.

Hi Reinaldo, I didn't hear this model, maybe you are asking PMG1005-T20B? For the firmware, I think you have to find the local dealer.

Hi Loey, Do you mean the baud rate setting? I found below information from user guide, hope it is helpful, fyr.

Hi Shaukat, As I know IES1248-51V support both SIP and H248 but with different FW ID. FW ID ARY is for SIP only, you might contact with your local support to get FW which support H248. Cheers,

Hi sir, PMG5317-T20B LAN port is auto negotiation so I also cannot find the setting in GUI to fixed port speed.

Hi Sir, May I know if you are asking like application URL? https://help.sap.com/viewer/368c481cd6954bdfa5d0435479fd4eaf/Cloud/en-US/de848be89bfa4fb1a570f5b526ba2527.html PMG5622GA is not support this function. Hope the information answered your question. Have a nice day.

Hi Ross, From the information I got, this device is support fallback to ADSL. Maybe you could try to contact with ZYXEL local support to get latest version (not sure which version you are using), and could also try with select G.992.5A only.

Hi Ross, For TP-Link TD-W8961N, Dynamic IP, Bridge Interface Deactivated and NAT Disabled. so the ADSL2+ modem is configured as IPoE WAN with NAT disabled? Based on your description looks the DSLAM configurations are correct, may I know if you faced the DSL link up but traffic not pass through? or even the DSL link is not…

Hi TIA, From your description, seems you changed VMG1312 to bridge mode, but what you mean switch to "Global" in IP management/ DHCP? In my experience, only need to configure vlan settings to match on both VES1724-56 and VMG1312. Then PC from CPE lan side should be ok to get the IP address from the dhcp server which…

Hi Avivm, You can check with ZYXEL local support in your region to get the user guide. As I remember it should be standard V type telco 50 cable. telco-50 female pin assignments will like below:

Hi Avivm, Have you check the user guide? Supposedly user guide will included the pin assignment mapping table. Cheers,

Hi Jfd, Have you check the cable with other devices to make sure the cable is ok? This is very old model, in my remember no need to do the special configuration for diagnostic but just connect CPE with default configuration. (or maybe with custom DSL line profile/ channel profile setting) or maybe you could try to connect…