RCP  Freshman Member

Hi @Zyxel_Cooldia, I've tested again and it did happen, unplugging and plugging the WAN cables fixes, same if I move the ports from auto negotiate and back. Roberto

I have discovered the problem. It looks like I had to set the ports to auto negotiate (already on that before). Went through the logs and all I did was a graceful shutdown and startup but this shouldn't have happened surely?!?!?!

I followed the same process I did on the USG60W. I could even upload my VPN2S certificate on the USG60W and it showed. Tried different certificate names and even removed the extension. It is not showing.

Hi @@Zyxel_Stanley, That seems to be the area but my certificate is not showing... Any thoughts?

This is a rather big issue as it renders the device useless for what it's trying to achieve. When can we expect a fix for this?

Do you have any news @Zyxel_Stanley?

This gives me the performance I need without compromising security, thank you @Zyxel_Stanley. I am still having the issue with DHCP not assigning IP's when reconnecting the device to the VPN2S or when connecting new devices. I also lose access to VPN2S Web GUI when the connection is made.

I went with Encryption AES256, Authentication SHA512 and PFS DH14.

Can the chosen encryption algorithm affect the speed? I should be getting 30Mbps but I'm only getting 5Mbps.

Hi, Success! Now I have three problems. Problem 1 At the moment I am testing with a single ISP of which I have 5 public IP addresses. My USG60W internet IP address ends in .242 and the VPN2S (for the purpose of setting it up) to .246. Both devices are connected to the same modem using 2 different IP addresses, as…

I've noticed the same thing after I updated the VPN2S. I am having issues with the web GUI loading on these browsers on both Windows and macOS boxes. Windows: Chrome Edge (Chromium) Internet Explorer Firefox macOS: Chrome Edge (Chromium) Firefox Safari Disabled all security features, tried in incognito... it keeps loading…

It didn't work... these are my settings. USG60W Settings Routing VPN Connection IPSec_VPN Zone VPN2S Zone VPN Gateway

Thanks for the reply. Where do I need to setup the policy route? On the USG60W or the VPN2S? I already have one on the USG but still no internet.

I have managed to establish a connection. I've setup USG60W as Site-to-site to dynamic peer. I've also setup for the VPN2S remote policy to full tunnelling. The current problem I am having however is that I do not have internet access when setup as full tunnelling. Any thoughts?