Raj — Zyxel Community

Hi Joslyn, The disconnect problem is still there. (For KEESS Engineering)

in NWA1123-ACV2 AP are not stable. Keep on disconnect though there is strong signal Comment by Raj August 2020

Hi Joslyn, It's a Customer request, using 2.4G for PC and 5G for mobile phones. And i tried 5G Channel width 20Hz, seems most of the users can not connect. They have 2 AP's installed at 2 storey (within same office) and the area is not that big. Approx 10 meter. Is there any way to widen the wifi range? Thank you.

in NWA1123-ACV2 AP are not stable. Keep on disconnect though there is strong signal Comment by Raj August 2020

Hi Joslyn, Thank you and noted. I will schedule the firmware upgrade. In another case, I did upgrade and set the channel width 20hz for both. and SST set to -75 for 5G. But user facing disconnecting issue. Can you please help me to check? Organization: KEESS Engineering Site: Keess@Frontier Thanks!

in NWA1123-ACV2 AP are not stable. Keep on disconnect though there is strong signal Comment by Raj August 2020

Hi Joslyn, Thank you for the suggestions. Is it possible to upgrade the firmware using nebula remotely? and after upgrade the configuration will still there or wipe out?

in NWA1123-ACV2 AP are not stable. Keep on disconnect though there is strong signal Comment by Raj August 2020

Hi Support Team, Organisation Name- Bala Site Name- Sk

in NWA1123-ACV2 AP are not stable. Keep on disconnect though there is strong signal Comment by Raj July 2020

Raj Freshman Member

Comments