Runner17  Freshman Member

Looks like it's quite rare issue. But for those who will see same issue will write my solution here. I just uploaded OpenWRT firmware to device. Full file name is "openwrt-19.07.3-ipq806x-generic-zyxel_nbg6817-squashfs-factory.bin", can be uploaded via WEB interfaces in the same way as Zyxel firmware. Now uptime of my…

PeterK, Result if following, pppd is not present. root@NBG6817:~# ps | grep pppd19661 root 1148 S grep pppdroot@NBG6817:~# ps | grep netifd 2365 root 1224 S /sbin/netifd20284 root 1148 S grep netifdroot@NBG6817:~# After clicking "Apply" on WAN settings page it appears, I see my PPPoE username and password in pppd command…

Zyxel_Freda, I understand that Your company internal policy maybe do not allow to answer such questions about alternative firmware. But I would be appreciate any advices about what else I can try to do in router Web UI or command line to fix that annoying issue.

As far as I know, provider creates unique user for each client, so only one client is connected with this account. As I wrote above, I have no idea what equipment is connected on provider's side, I have only ethernet cable from provider. My question was not about flash or not flash. At the moment this router does not meet…

And one more question: what I will lose if I flash latest version of OpenWRT? Which features will be missing, comparing to default firmware (which is also OpenWRT based)?

Zyxel_Freda Thanks for investigation. Probably You do not know how difficult is to reach technical person on provider side. For me much simpler will be to switch back to my old router, which does not have such troubles with same provider. Actually, this is first question all providers ask in such cases "Does this problem…

Zyxel_Freda, thanks for answer. 1) Apart from MAC, everything is blank 2) OK, next time will collect the logs. But You have to talk to Your UI expert - It's not possible to understand that 2 checkmarks "Online firmware upgrade" and "Access control" are enabling verbose logging :smiley: 3) No, it does not help Now I…

Sorry, Wiasouda, did not understand fully Your question about LED. Usually I do not monitor LEDs. When router operates normally WAN LED is flashing. If Internet disappears, then I look at LEDs and see that WAN LED is dark. At this moment WAN IP is not shown on "System Status" page. I did not try to apply WAN setting…