Comments
-
Hello1 I own both devices and in my opinion the 7490 definitely has better 4G. 7101 has 6 antennas but 2 of them focus mostly on high bands above 2700 mhz. I have replaced one of the antennas on my 7101 with an external antenna and will be replacing the other 2 in a few weeks. In my area there are only B3, B7, B8, B20, B28…
-
Network settings/Broadband/Cellular APN/Modify. Uncheck IP Passthrough if enabled AND DONT FORGET HIT OK…… Restart all units…..
-
Maybe if you disable IP-passthrough….
-
It's only for managing your unit!
-
Is it a new unit? I have read about a similar problem and then the PoE Injector was broken.
-
I suspect you have already powered down the device for a few minutes. Have you tried resetting the network settings on the computer? It looks like you have no internet connection so that might help you. I have replaced my 7101, it messed up when it was -40°C at the beginning of January. There were constant breaks and it…
-
-
Try this! Turn off your N7101 internal wifi. 2. Uninstall your Zyxel air app and restart phone. 3. Install Zyxel air app. 4. Launch the app and select manual input, don´t scan…….. 5. Fill in the information for your regular network and press "Log In". You may get an error if you are logged into your NR7101 at the same time…
-
Turn on inbuilt wifi network! Are you connected to your NR7101 wifi inbuilt network or another network? You can increase coverage of your wifi if you go to "Network setting/Wireless" and set bandwith to 40 and tap "Apply".
-
Do you use latest firmware for the Zyxel Nebula FWA510? If not, read this PDF before upgrade. https://download.zyxel.com/Nebula_FWA510/firmware/Nebula%20FWA510_1.17(ACGD.1)C0_2.pdf Link to latest firmware. https://download.zyxel.com/Nebula_FWA510/firmware/Nebula%20FWA510_1.17(ACGD.1)C0.zip
-
App updated and working on my Samsung S23 Ultra.😀
-
You use zipfile. not just a single file….
-
Open link and you will find what you are looking for, just scroll down……. https://support.zyxel.eu/hc/en-us/articles/4403365084818-Zyxel-5G-Devices-NR-Series-Advanced-Downloads-Firmware-and-other-resources
-
Latest NR5103 firmware is V4.19(ABYC.3)C0 dated 5 Jan 2023 Note, this is not firmware for NR5103e NR5103 Firmware Download Modifications in V4.19(ABYC.3)C0 Known defects N/A Feature Enhancement/Configuration Changing 1. WAN backup for IPv6 only. 2. Schedule Reboot feature Fixed Defects 1. [Zyxel-SI-1433] Fixed specific…