Siles

About

Username
Siles
Joined
Visits
9
Last Active
Roles
Member
Points
8
Badges
0
Which product type of newsletter you want to receive?
I dont want to receive any newsletter
Posts
8

Comments

  • Before I do that, I want to get some important data already through the console. Since scp is not installed and curl is behaving awkward, is there any other program that you may know of, that I can use to transfer data from the cl to my windows machine? I don't know all of the installed commands on the Zyxel machines.
  • Also in the GUI he changed the status from Crashed to degraded.
  • Alright so Mijzelf said: No, that is because you told it to leave disk1, by only specifying 2..4: /dev/sd[bcd]3. The manager would deny to assemble the array if disk 1 was also added, as it's not in sync with the others. I am blind, and not used to this type of work ^^" I did what you said ~ # mkdir /mnt/mountpoint~ #…
  • Do I need to create the Volumes again to access Data a the volumes are gone as well ? 
  • mdadm --assemble /dev/md2 /dev/sd[bcd]3 --runmdadm: /dev/md2 has been started with 3 drives (out of 4). Looks like it didn't take disk1 into account as it must be really totally dead. /proc # cat partitionsmajor minor #blocks name 7 0 146432 loop0 31 0 256 mtdblock0 31 1 512 mtdblock1 31 2 256 mtdblock2 31 3 10240…
  • Alright I will give it a shot, see if that get's it to run. Disk 1 does have a bad SMART and was also the reason why the Raid died, but I don't understand why, the NAS should've just dropped it and asked to replace it instead of killing the array :/ I will get back to you after I ran he command Thanks again!!
  • So happy you replied! Here is the output <div>mdadm --examine /dev/sd[abcd]3</div><div>/dev/sda3:</div><div>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Magic : a92b4efc</div><div>&nbsp; &nbsp; &nbsp; &nbsp; Version : 1.2</div><div>&nbsp; &nbsp; Feature Map : 0x2</div><div>&nbsp; &nbsp; &nbsp;Array UUID :…
Avatar