SmileitsMe

Hi, as there will be the ABUV.10 released.. we have several Modems at our customers.. sometimes with 2 different providers.. (both SIM Slots activated.. as Failover if one Provider is down (customer requirement)) so we would like to have the actual zyxel firmware.. even for NR7302.. we ourselve are running NR7101 and 7302…

Hi! The loop had been detected and solved.. but the network performance is wobbling.. so we disabled LLDP & LLPD MED cause of CPU Load high.. since we did this .. load is at 12%.. i´m waiting for techlog from my it partner.

Hi.. network is stabel since we have deactivated LLDP-MED.. what causes topology changes.. sad not to see on which ports this happens..

Hello, We have deleted LLDP & LLDP Med of this switch, since then CPU Load falls at 12% so problem solved. Network is stable now. But this can not be the solution. Is the CPU of this switch to weak to provide this Feature?

Hi Melen! Ok… had disabled med notification.. did not help.. switch crashed again when trying to get tech logs.. but the other switches are ok? So config was given to a new hardware.. same issue. may this is really a firmware problem? ok read your notice.. will disable lldp notification.. but will this not disable the…

CPU Utilization Current (%) 37.76 is this normal ?

have disabled this at 201.. but also LLDP will be written.. has the switch to be restarted to disable this? 1 2024-04-19T11:53:43+02:00 IN interface: LLDP Remote topologyChange 2 2024-04-19T11:53:43+02:00 IN interface: LLDP Remote topologyChange 3 2024-04-19T11:53:43+02:00 IN interface: LLDP Remote topologyChange 4…

ok.. we will test this.

Wrote you PN with Files