T3sticle  Freshman Member

:) Thank you very much for your Help... the RAID is back up an running.. the missing data is now save an copied to another disk. We need more people like you that spend time for the Problems of strangers.. in this World today. Best regards Bernd

only thing to cross the fingers that not one of the disks spread the wings before the 50 hours are DONE

Oh YEAH

BusyBox v1.19.4 (2017-05-26 16:43:23 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # mdadm --stop /dev/md2 mdadm: error opening /dev/md2: No such file or directory ~ # mdadm --stop /dev/md2 mdadm: error opening /dev/md2: No such file or directory ~ # mdadm --create --assume-clean --level=5…

thats the best news at the end of 2018 .. Thank You..so i try my best..will tell you what happens

but before i do this..is there a chance to create a raid 5 out of the 3 disks 2,3,4 just to access the data.i have a bad feeling to reassamble the raid with 4 disks as first step:)sda is the orginal "defective" disk .. now replaced and in raid 1 statusSDB disk 2SDC Disk 3And SDD Disk 4 these three are in Hot Spare status…

ok thx i try again

sh: /root: Permission denied ~ # sh: syntax error: unexpected "(" sh: sh:: not found ~ # ~ # Enter 'help' for a list of built-in commands. sh: /root: Permission denied ~ # sh: Enter: not found sh: sh:: not found ~ # ~ # sh: /root: Permission denied ~ # ~ # ~ # mdadm --stop /dev/md2 sh: /root: Permission denied ~ # sh:…

Thx for your help...but there seems some problems BusyBox v1.19.4 (2017-05-26 16:43:23 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # mdadm --stop /dev/md2 mdadm: stopped /dev/md2 ~ # mdadm --create --assume-clean --level=5 --raid-devices=4 --metadata=1.2 --c hunk=64K --layout=left-symmetric…

wow.. thx.. thats a lot of information...im german an my english is far from understanding everything..yes the disk one in raid1 as "only" member was inserted to reasamble the raid 5 of the 3 other disks.with the command line in yellowi should be able to recreate the raid 5 to access the data ?

BusyBox v1.19.4 (2017-05-26 16:43:23 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. / $ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md3 : active raid1 sda3[0] 1949383488 blocks super 1.2 [1/1] [U] md2 : inactive sdb3[1](S) sdd3[3](S) sdc3[2](S)…

yes.. but my big fault was i didnt switch off before swapping cause i was afraid if i shut down everything is gone. so i put it back just 5 seconds after pulling so i know in fact all data is still avaiable on the 3 remanig disks but i have no clue how to tell that the Zyxel NAS i think i have to do this with command lines…