Comments
-
@Antoine_Richez Can I know what is the way you got the VPN performance, SMB, FTP or Http? I would like to establish the SSL VPN from my side, therefore can you private message the remote information to me?
-
@mMontana For the USG Series, the USB Dongles and compatibility list on FTP site is our newest version, and we dont have plan to update the list so far. Can I know any specific usb dongle you want to be supported?
-
@VPN50_100_User If you want two VPN50 connect to VPN100, you need to create two VPN profiles on VPN100 for this scenario.Also, you can set different Proposal or Pre-shared key to avoid rule mismatch.Be aware that just mMontana mentioned do not overlap subnets among sites.If the VPN still down, you can go to Monitor>Log>…
-
@Mattia_Tecnosoft_Srl Customer network IP is 10.0.1.0/24, and the NAT(Fake) IP 172.31.167.7/32. the subnet mask on customer network and NAT IP need to be the same .(since it’s One IP mapping to one IP) Therefore, the NAT IP: 172.31.167.7/32(need to modify to slash 24) As your scenario, you can reference this thread…
-
@iSpeed The USG Flex Series can be managed by Nebula currently. The ATP Series will be managed by Nebula in Q4 this year.
-
@imaohw & @holz The solution has been included. Please have a check. https://community.zyxel.com/en/discussion/4751/zld-v4-62-wk02-firmware-release#latest
-
@PeterUK Regarding to this case, we would like to compare the routing trace, and IP route on issued situation and non-issued environment on USG60W and VPN300. Please private message the compared result which you have got. Reproduce the issue Ping: 192.168.53.2 to 192.168.53.11 continuously. Go to USG60W's and VPN300's…
-
@PeterUK After checked it internally, the customize MAC on Wan page mainly supports on USG 20 VPN and above models but not on VPN2S. It is incorrect GUI layout on VPN2S. Regarding to this scenario, you can consider to implement it on USG 20 VPN.
-
@imaohw After I created two Vlans with the same MAC address on IP/MAC binding table. Next, I created the LAG, the error message will popup. The issue can be confirmed, so if any update, will let you know.
-
@Zamazingo The USG Flex provides Higher Detection Threats Rate. It supports advanced Anti-Malware with cloud query express mode, and Reputation filter and Email Security. More information regarding to USG Flex, you can check this Link USG Flex . The datasheet of USG and USG Flex as your reference as well.
-
@danyedinak I used putty and tera term and the issue did not occur. Can I know what application did you ssh to device? Putty or? Can you private message remote access for check further? I would like to connect to you device via ssh.
-
@Michael_I I’d like to VPN to your Fritzbox and see if the same symptom will happen on my device, can you private message the VPN information of Fritzbox for connection? Also, as you mentioned "IKE gets always a failure. The connection is working", can I know the log will appear during establishing VPN?
-
@Dovetail_MD Regarding to this case, can you private message your configuration for check purpose?
-
@Tecnointegra I have private message to you. Please have check.
-
@IkkI_Magna You can check the below example as your reference. Create the DDNS profile, as example, I create the DDNS type from No-IP Create the address object Configure the NAT rule, External IP select the address profile you created. For the Internal IP, just type server IP.