Comments
-
@Adam777 The password could be changed on myzxyel.com "Account"~
-
I can establish the tunnel successfully with Ubuntu is your NSG located behind the NAT gateway? And is there any relevant clues in event log?
-
Assume your Windows setting is correct then I think NSG user define is not support DHCP option 15, since back to the day when NSG don't have option 66 it's not works in user defined either, til they have this option.
-
Only wahtsapp is affected or is there other service encounter the same problem? What's your topology looks like.
-
Is the port which connected phone set as trunk or access? How about switch to access to do the cross check, if the phone get the other Vlan subnet.
-
Have set the correct OUI and is the phone Vlan detected set the correct Vlan tag?
-
@flottmedia It's looks like you need setup the virtual server then can access from WAN to LAN's NSW web GUI.Assume you are using NAT mode and the initioator from WAN to LAN, LAN IP assign the NSW IP.You can find it in Gateway>fiewall>NAT
-
Hello @HansU You can find click to continue in NSG, navigate to Configure>Captive portal, click change setting. Redirect to the configuration page, believe it is what you want. B)
-
@dbarchitectes Have you try to reboot? I got experienced last time, reboot the PC to apply the change.
-
Is your AP configuration status show "up to date" in AP monitor page?
-
It's looks like it sorted at event logs of "system" category.
-
How about you pate the screenshot for your virtual server setting?
-
What you mean the DHCP connection issue, might more specific~
-
@snowbike I can dial-up the tunnel like below, is your NSG use the private IP and locate behind the NAT server?
-
Have you disable the firewall rule on windows? Maybe that's why there is no respond. As I recall, you cannot find the shared folder in the network neighborhood, since their VPN tunnel doesn't allow broadcast traffic pass through the tunnel. You can try to access via IP directly.