novasune  Freshman Member

I am aware of the export feature and it does the job pretty well . The feature i seek is pretty much just a "front end" for that ,saving the hassle of going thru excel and finding the photo. I am aware this method is more flexible , still i think it would be a neat and probably fairly easy thing to implement .

My goal is to get VLAN77 & 88 present on the SFP port, while also present on P4 port. I dont need the "physical Lan1 192.168.1.0 " anywhere, everything runs on vlan . Problem is that sfp cant be assigned to belong to same "Lan1" as P4-7,and each VLAN has to be assigned to either SFP or "Lan1" (se first two pictures)

Actual problem solved by connecting switch1 &2 , so only 1 switch goes thru the SFP port, avoiding problem that a VLAN cant be assigned to SFP and Lan1 baseport at same time. Unsure if SFP was meant to be used internally or only as WAN.

I want to run VLANs thru the sfp port, because i want to connect it to a switch (GS1920)where i want to access the various vlans present in the flex200. Just as i do to another GS1920, just by using LAN/P4 port thru RJ45 ethernet. I have an "office77 vlan" and "production78 vlan" (simplified) ,i need to have both present…

That might work, but i am really afraid to do so. A future firmware update might thrash it, and if we move it to nebula management, it will probably break too. It will cost my night sleep to i have such a fragile setup going, it is an important site. For a less critical situation, i would try it. Unfortunately i dont have…

I replied with a configuration example