tonygibbs16  Guru Member

Hello, Welcome to the forum. Can you please let the forum know what version of firmware your NBG7510 is running? Section 8 of the NBG7510 user guide, available at https://www.zyxel.com/us/en-us/support/download when you put NBG7510 in the search box, says that you also need the 802.1p priority value and the 802.1q VLAN…

Hello @Mathamphetematiker Welcome to the forum. Can you please say what firmware version is in your NBG7510 at present? Is it in Router mode or in AP mode of operation? Is MAC filtering on WiFi that you are trying to do? V1.00(ABZY.6)C0 is the latest version of firmware, according to…

Hi @Zyxel_Jerry Thanks for your help. It should be in your Inbox, and a syslog extract. Kind regards, Tony

Hi @Alex_DE74 Mmm…It might be worth you trying the firmware version 17.39.17.1 at https://www.telekom.de/hilfe/geraete-zubehoer/router/zyxel/vmg3006-d70a?samChecked=true especially if they are your ISP. Kind regards, Tony

You're welcome @Zyxel_Jerry . Thanks for your reply. Until recently, there were more than 4 devices showing under Traffic Status → NAT and on the topology diagram. A mixture of wired and wireless clients were showing. Please let me know if you want any logs before I reset the NBG7510. Kind regards Tony

Hello @Alex_DE74 Was it the IMG file that you tried to load? Kind regards, Tony

Hello @Hoosen93 Welcome to the forum. Your gaming issues might be due to the firewall blocking ports… It would be worthwhile for you to research your problematic game with it's manufacturer and see if they have information about what networking ports should be opened in a firewall in order for the game to work. Kind…

Hello Mario @Bamboocha You're welcome. Blue & to the right is on for Mesh setting under Wireless in the NBG7510 web gui. Kind regards, Tony

Hello @Bamboocha If you are running v1.00(ABZY.6)C0 firmware, then you will be able to mesh your NBG7510 devices. I think that you need to use a wired connection between your Icotera router and one of your NBG7510 devices (either with a CAT5e cable or via Powerline networking). Then you can mesh the two NBG7510 devices…

Hello @Tredok Maybe not an issue if the connectivity is all working. Kind regards Tony

Hello @Swampy Ok. Apparently under Network Setting > Wireless > Guest/More AP > Edit you can generate a network password automatically, which might help you. It should I hope generate a valid password as a valid pre-shared key. * see screenshots below. The device is probably also being particular about what characters are…

Hello @Swampy If you want, there is some later firmware for VMG1312-T20B at https://support.zyxel.eu/hc/en-us/articles/4403361365778-Zyxel-CPE-Devices-Firmware-Advanced-Downloads-Firmwares-and-other-resources which could take you to V5.30(ABSB.5)C0 . Kind regards, Tony

Hello @Tredok Welcome to the forum. Which version of v5.50 do you have please? V5.50(ABOM8.3)C0 is the latest firmware available (dated March 2024) to download at https://www.zyxel.com/uk/en-gb/support/download?model=vmg8825-t50k Kind regards, Tony