xkp68  Freshman Member

Same here , on a fresh windows 10 installation running windows update.

I think there is a mistake here... my post is about ATP 500

Thanks for your reply. I red the read me first section, i was just wondering if, the settings showed in my previous post means my device is not run in Device HA mode, or what else i have to check before proceeding.

Sorry for the long delay in my reply. So, as a recap: 1) i can press the "cloud firmware" icon to update from V4.60(ABFU.0) to V5.21(ABFU.1) with no need to manually upgrade to ZLD5.10 (as said in the update guide of V5.21(ABFU.1)) and then upgrading to ZLD 5.21 Patch 1. 2)As long as i do not need to switch to standby…

As i see many people complaining about the App Patrol signature issue, do you suggest to disable app control before proceding to update the firmware? if so, how can i do this via the web interface? I really want to avoid to be trapped in this issue. Thanks in advance...

Hi again, when u use the word "client" do u mean only VPN client or any people accessing services behind the firewall? Thanks again

Thanks for your kind reply.So, as we are using 2FA, (1)is it ok if I just modify the existing rule "WAN_to_Device" so that the field "IPV4 Source" will change from "any" to your "Geo-Germany" GeoIp Object (of course properly configured with my country).? Or (2) should i remove the 8080 from the…

thanks for the reply. 1)My main concern was about the fact i have no users outside my country and i see this "info" logs from USA (i m not in the USA). As the logs are in the info category it is not clear to me if there is an intrusion or not. Moreover my only VPN was a SSL VPN and till now i have never seen any IKE log…

Thank you very much

Hi Jeff, thanks for your answer. Unfortunately it is mandatory for me not to use a cloud-based solution, this is why i m asking for alternative.As a matter of fact the ATP500 is able to manage till 4 remote server for logging so i hope someone here uses this feature.

@Zyxel_Charlie Thank you very much

Thanks for the answer. I have created the same rule, but what do you mean when you say "type public with port 81"? For now i have been able to solve the problem changing the port of "configuration->System->WWW->Service control->HTTPS" from 443 to another port. After that, i m able to reach the internal ip from internet…