Mijzelf 
Guru Member
-
Re: NAS542, Download previous Firmware
To be able to downgrade, you first have to login over ssh/telnet, and execute suecho 1 > /firmware/mnt/info/revision1 -
Re: NAS542 Can't find NAS on the network after shutdown/reboot, not even after reset
Have you tried: another cable another switch port another network port on the NAS? (IIRC, it was one where I was using all available space except one disk, i.e. 1/4th of the space was used for RAID c…1 -
Re: NAS326 defaults after restart or shutdown
Last command gives sh: flash_eraseall: not found OK. According to the script in NAS326.zip it's 'flash_erase /dev/mtd2 0 0' on the NAS326. Don't ask. I won't be able to use RAID1 if I install it on h…1 -
Re: NAS326 defaults after restart or shutdown
[quote]I removed the disks <snip> and then on reboot it freezed[/quote] That could be related to the bad block in rootfs 1. When I said it is only used on a fresh installation or firmware updat…1 -
Re: NAS326 defaults after restart or shutdown
Your problem is not exactly the same. znas4home had a bad block in the middle of the 'Config' partition. Your bad block is inside 'RootFS-1', and the bad PEB's are in 'RootFS-1' and 'RootFS-2'. Those…1
