sitro  Freshman Member

hi, were you successful in your attempt to install Docker? I would like to do the same on my Nas542

Hi,Thanks for the answer Before doing any blind hardware changes to see if it works. I would like to know what the error numbers correspond to, I see that one is 104, the other 119, and me 205 with the single answer changing the router. I don't think that's how you can solve a problem.

as I answered on the other thread, by actively looking for it I found it. The thing is that in the web GUI it points to only one of my two network interfaces. But Twonky is only running on the second interface.

ok, Answered on the other thread

oh yes, thanks to your comments I see what the problem is: I have two network interfaces on the NAS (with two network cables), one has the address 192.168.1.101, the other 192.168.1.102. With the lsof command, we can see that twonky is listening on port 9001 in localhost and also on the 192.168.1.102 interface but not on…

I don't know what is winscp. I'm on linux station. No, you are making a mistake. In the configuration file, the port is 9001 for http and 9443 for https (TLS). There is no change at this level. Anyway, as you can see in the scan of open ports, neither of them are open.

@Jerry : No you do a mistake. In configuration file le port is 9001 for http and 9443 for https (TLS). there is no change in that Anyway as you see in the scan of open port nor one neither other is open.

the tips doesn't work.After reboot the state is the same.

ok just reply to Jerry in privateThe port 9001 is not open . nmap result on NAS : $ nmap 192.168.1.101 Starting Nmap 7.80 ( https://nmap.org ) at 2022-12-09 16:06 CET Nmap scan report for nas.home (192.168.1.101) Host is up (0.00027s latency). Not shown: 984 closed ports PORT STATE SERVICE 22/tcp open ssh 23/tcp open…

I look a little bit more on the website of Zyxel. The question was already asked there without answer : https://community.zyxel.com/en/discussion/6338/nas-542-twonky-server-not-reachable-via-9001-port https://community.zyxel.com/en/discussion/6338/nas-542-twonky-server-not-reachable-via-9001-port…

Same here

some information to complete my question: firmware : V5.21(ABAG.9)I did a little tour in the file system and I don't see any twonky package : <div>root@NAS542:/# ls -al i-data/e0c90389/.PKG/</div><div class=" Quote">total 68</div><div class=" Quote">drwxr-xr-x 17 root root 4096 Apr 27 2021 .</div><div class="…

root@NAS542:~# smbd --version Version 4.1.7 root@NAS542:~#

finally after many attempts I succeeded. With the perl 5.14.2 included in the FonzBut it's a big mess and not easyNot to mention that impossible to find the original of ffp, half of soft in fonz are outdatedHalf of download sites are downand that I did not find any documentation on the zyxel NAS associated with the…

That's right I have a ddns even if I don't use it. But I don't access the NAS from the WAN, neither to get files nor watch video. darkstat is a module of the NAS (if i remember it's a module from metarepository) , installed on the NAS