ATP800 LACP功能詢問
All Replies
-
Hi @Mars,ATP800已經支援LAG, 請參考功能規格.
See how you've made an impact in Zyxel Community this year!
https://bit.ly/Your2024Moments_Community0 -
目前我的APT800 firmware version: 4.55 ,
Configuration > Network > Interface 內無找到LAG相關設定
請教是否需要升級韌體才能有LACP功能?
目前建議升級穩定的韌體版號是?0 -
Hi @Mars,從4.60(ABIQ.0)C0版本開始支援LAG. 可以參考release note第43頁. LAG設定在CONFIGURATION > Network > Interface > LAG.
https://download.zyxel.com/ATP800/firmware/ATP800_5.20(ABIQ.0)C0_2.pdf
See how you've made an impact in Zyxel Community this year!
https://bit.ly/Your2024Moments_Community0 -
若打算由4.55升級至5.21(ABIQ.0) 是否需要逐步升級版本至最新?
4.55 ->5.0 ->5.1 ->5.2->5.21
或是 4.55 -> 5.21即可
再請建議感謝0 -
Hi @MarsChang,如果4.55是正式版本4.55(ABIQ.0)C0, 而不是其他date firmware版本, 可以直接升級到5.21. 建議升級前先備份startup-config.conf. 以下這篇類似的問題提供你參考.
See how you've made an impact in Zyxel Community this year!
https://bit.ly/Your2024Moments_Community0
Zyxel Employee
