評論
-
Hi @cmanley , Is there any blocked log at monitor > Log > View log while accessing this website?
-
HI @FelixSchneider, Once the Captive Portal is enabled in the firewall, it will redirect to an HTTPS authentication page. Since the redirect uses a self-signed certificate from the firewall, clients will see a certificate warning message.
-
Hi @DaviD42 , Could you take a screenshot on SecuReporter for better understanding the issue?
-
Hi @techsupport, Can you send me your device web gui access in PM for further checking?
-
Hi @jamess, Not sure if it is a hardware issue after the firmware update. Could you help us confirm if the serial console is available? Assuming it is available, maybe we can try to use firmware recovery to recover this device.
-
Hi @ESupport , It's unable to modify the admin account. Please enable 2FA for admin access. We are checking if the service control is in our roadmap, will update status on this post.
-
Hi @DPL, Welcome to Zyxel community. Could you help us to enable support request, and provide me your org, and site name in PM.
-
Hi @Stephen378Baker, Please try to downgrade the firmware to V5.37.C0, and then run the ZTP again to provision to NCC. The firmware is provided in the PM.
-
This issue is not encountered by all devices; therefore, it is not suitable to be placed on the official site for everyone to update.
-
Hello @phphil, It's based on a different operating system, and the configuration structure is completely different. You need to set it up from scratch.
-
Hi @SovSibir , @HugoStigliz , and @T_G, Could you provide me the model in PM, i will provide a fixed firmware for update.
-
Hi @SovSibir , Could you provide the ssh access to me in PM. I will help you to recovery remotely.
-
Hi @GiuseppeR , You can achieve this through Organization-wide > Organization-wide manage > Configuration management. As for migration from USGFLEX100 to USGFLEX200, you need to set up from scratch; it is unable to migrate configuration directly from NCC.
-
Hi @crsdg , When you ping 'serverdata,' it initiates a NetBIOS name query, not a DNS query.
-
Hello @daniebedi, For a dynamic guest account, you can configure a billing profile for guests. However, only three profiles can be defined for a given time period. For example: Button A: 1 Day Button B: 2 Days Button C: 7 Days