kevindd992002 
Freshman Member
評論
-
I only have one AP on this site with this firmware version: V7.00(ABTD.2) (Latest)
-
@Zyxel_Kay
-
@Zyxel_Kay I'm starting to get the NTP Update failed error message in the logs again for one of my sites. If you remember, you have deployed the fix (and that fix has been on the latest versions already) for both sites. Organization name: Kevin's Infrastructure Site: Condo
-
Thanks. I don't know if this is related but starting from 2024-10-25 11:57:19 today, my AP's started blinking green and amber 3 seconds apart and when I checked the event logs I saw these: And these persisted until around 2024-10-25 17:13:18. What happened here?
-
Root and repeater AP are only used for smart mesh, correct?
-
Ok. I just disabled Smart Mesh. How about Etherner Failover, should I enable that or not?
-
I see. If I reboot my DHCP server, then that will really result into an uplink connectivity issue on the AP's, correct? What does Smart Mesh do and where is it used for?
-
Done. Organization: Kevin's Infrastructure Site Name: Casa MF
-
Sorry, but that is not a solution. That is a workaround. I don't want to set a static IP. DHCP reservation should work just fine and MAC addresses should NOT change whatsoever. This is the first time I saw access points changing MAC addresses. I always use DHCP reservations in any network deployment that I have since they…
-
Here are all the bogus MAC's that are on the DHCP lease logs: Restarting the AP's fixes the problem. I don't know how to recreate the issue but the only thing I did earlier before this manifested is that I restarted the DHCP server.
-
Ok, I just tested this in my "Casa MF" site and I can also connect to the wifi AP's properly when the Internet connection is down. This site has a basic flat network topology. Opnsense firewall (dhcp, dns, router) -> brocade icx6450 switch -> 9 x NWA210AX AP's I have to test the same scenario in my "Condo" site because…
-
That is inaccurate. I have my mobile device to "connect always" to this SSID even if there is no Internet. My laptop connects to any SSID's without Internet too. I have another site with all Ubiquiti access points and I have no issues connecting to the network when there is no Internet connection. I need to have local…
-
What happens if you add the device to the MAC list and set Authorized to No?
-
Done. I enabled it for you.
-
Hi @Zyxel_Kay I have a similar issue on the same organization but on a different site (Casa MF) and I have some odd findings about this. The schedule for both Guest and Guest_Limited SSID's is set to be: 5AM to 5PM - OFF 5PM to 5AM - ON And this is daily as seen here: Now when I check the Devices page, I see this: As you…
