AP & mac address filtering ??

ITGS
ITGS Posts: 2
in Nebula
I installed 3 new NWA50AX in a new site and all work fine.
I would limit access on a specific SSID , based on device mac address but I don't undersand how can I do ??
Thank you for support

Accepted Solution

All Replies

  • Zyxel_Jay
    Zyxel_Jay Posts: 227  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch 5 Answers
    edited May 2022 Answer ✓

    Hi @ITGS

     

    Welcome Zyxel Community

    Here is a FAQ for your reference.

    [NEBULA] How to configure MAC-based authentication to enhance Wi-Fi security?

    Please note that when you are setting the SSID Advanced Settings, select the SSID you need for mac auth.


    You also use this FAQ

    [NEBULA] How to add policy rules for clients?

    Select "to specific SSID" and manage your device allow or block. 


    Any problem can talk to us.

    Thank you, have a good day.

     

    Zyxel_Jay

  • ITGS
    ITGS Posts: 2
    Thank you for reply.
    Unfortunately I can't enable mac authentication. Option is grayed out.
    I think that NWA50AX don't support this feature... 
    If this is the reason, I'm very surprise because it's a standard feature and is very limiting.
    If I knew this, I did not buy this AP
  • PeterUK
    PeterUK Posts: 3,459  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    in Standalone you should have mac address filtering for that model not sure why you can't in NEBULA 
  • Zyxel_Jay
    Zyxel_Jay Posts: 227  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch 5 Answers

    @ITGS @PeterUK

    Thanks for your reply. Sorry for not noticing this.NWA50AX isn't supported MAC Authentication.

    You can find this information with the path.HELP>DEVICE FUNCTION TABLE>SB Access Point


    Nebula has the same mechanism as Mac address filtering, which you can set up using the second hyperlink from the previous article.

    “You also use this FAQ

    [NEBULA] How to add policy rules for clients?

    Select "to specific SSID" and manage your device allow or block. “

    If you have any question,please reply me.
    thank you

    Zyxel_Jay

  • kevindd992002
    kevindd992002 Posts: 34  Freshman Member
    First Comment Friend Collector Second Anniversary

    What happens if you add the device to the MAC list and set Authorized to No?

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）