Ijnrsi  Master Member

Hi, Is changed another port the same result? Try to press reset button? 1 beep and release is reset IP and password. 2 beep and hold 5 seconds, then release is full reset.

What is your file system type for the HDD in master? Normally, if the HDD is basic then it should be detect and mount to backup NAS. Did you try reboot?

Maybe some of expert can do this, but as I know Zyxel doesn't have a way or information let user to manually install package.

Hi, Do you try to rescan the media content on your NAS326? Access your NAS and twonky management page, then go settings > system > server maintenance to rescan the content, maybe it could solve the problem. But according to your description "Edit Shared Folder" then got "Unexpected error", I guess your configuration might…

Hi, This is check items from @Zyxel_Brian, I think you can check this first:1. Does router support UPnP?2. Does MyZyxelCloud portal find the device?3. Does the NAS receive the correct IP address and DNS address?4. Do not use NAS's IP as DNS address, try Google DNS or router's gateway to be the DNS in NAS.5. Does NAS find…

MAC has the terminal tool embedded, so you can the tool by searching "terminal". Then type "ssh nas_ip" or "telnet nas_ip" to access your NAS540. Login info is the same as admin/password.

Yes, you can put 4x8tb WD hdds in NAS542.

Hi Zyy, The NAS you can put the maximum 4x12TB in, so your concern of 4x8TB WD RED drives is sured, and this part is not controled by firmware, just the information no update in your country. But the most important part is the maximum size per volume is 16TB.

As I know, the copy process is running in the background and there is not the way to see the realtime progress and percentage. You can only check the disk space and take time to wait till the copy done.

There are some ways to access NAS as CIFS, FTP and file browser in web management page. The simpler way is with CIFS, then you can type \\NAS_IP or \\nas540 into your address bar in the file explorer as below, and you can mount it as the network drive:

zCloud APP is using NAS's login password to access, so it can work for you. Have you tried it before?

Hi, I think you can check the official global website for HDD compatibility list, the maximum size per each is 12TB, but only seagate disk. https://www.zyxel.com/products_services/nas540.shtml?t=p#productDetailTab6 You can put 4x12TB in your NAS, but you have to know one thing as the maximum size per each volume is 16TB,…

When the steady beep occurred is meaning your HDD now has problem and need to check if there is any health problem such as bad sector.And you need to repair it or replace a new one. If you used RAID 1 with 2 HDDs, and one of both had problem, but still can access the data, then you should copy/backup data first.

Is the account/folder privilege setting still correct? You guys have special setting for the privilege or you use "ü" as password or folder name?

The design of NAS to change RAID type is only for basic and RAID 1 and RAID 1 to RAID5 Here is the information from Zyxel KB article: http://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=015008&lang=EN http://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=015007&lang=EN If you now currently is…