StefanZ  Master Member

I would start with: Type Protocol Port UDP mDNS 5353 UDP Airplay 7200 – 17210 TCP Airplay 5000, 7000, 7100, 50000, 7200 – 17210 Allow that from ALL to ZyWall and vice versa and see what happens.

Thanks for the clarification. This should somehow denoted in the interface, since it is different to pretty much any other interfcace part. Knowing this and reading the manual… When you create a bridge interface, the Zyxel Device removes the members' entries from the routing table and adds the bridge interface's entries to…

https://community.zyxel.com/en/discussion/comment/53173#Comment_53173 This might be related to browser cache – try logging in using a private mode browser window.

We use several NWA50AX – but not with mesh. Mainly because the NWA50AX doesn't support mesh :-) So I guess that's your problem too. Correction, the NWA50AX does support SmartMesh, it just doesn't list in every support article? Was looking at:…

Today I found another interesting one: <141>Jun 1 11:05:14 usgflex200 CEF:0|ZyXEL|USG FLEX 200|5.36(ABUI.2)|0|Access Control|5|devID=XXXXXXXX […] Now we get a double space behind the month's name – so it reads "Jun 1", instead of "Jun 01" or "Jun 1".

I am on OSX 12 with the latest Chrome, using http:// Clearing the cache indeed did the trick for now. Logging into all 3 APs worked. I will post logs when I encounter the issue again.

I am using a current Graylog server. First issue is, that you cannot use the native CEF input – UDP RAW works, but you already lose some automatic pre-processing. I suspect that is because of the prepended facility code. That code could just live in its' own field. Generally most of the Zyxel logs are formatted in a way…

I don't know the problem tho. The config works, but it reset on me two times now when applying an update. Also the FLEX200 is not where i am – when it resets the config on reboot again, I have to take a drive. So I was wondering, if there is some sort of a "dry run" to have the unit parse a config, but not apply anything.

Having a similar issue, where our FLEX200 fails to load up the config after FW updates, then defaults to stock settings. After forcing the load of our backup config, it all works, BUT that one VPN gateway forgot which certificate to use.

Not sure if it is related, but I recently got two instances of some asian IPs establishing more than 1000 connections (unclear how) and my FLEX50 rejected any additional connections from them. As for the VPN ports: I added rules for those ports to only accept certain countries as clients. This sure ain't perfect security,…

https://community.zyxel.com/en/discussion/comment/52378#Comment_52378 Thanks! Well so mine ain't too special – still rather hot for an appliance CPU.

Just tried to find the device temperature of my USG FLEX50. Seemingly the CLI cannot show me those (no commands for fan). And the cpu-temperature-monitor commands (page 52 of the V5.36 FLEX50 CLI reference PDF) don't seem to exist for this device.

Would be great, if anyone else using a FLEX200 shared their device temperature to have a comparison.

Thanks for the reply. The FLEX200 is at the bottom of the rack, 2 Slots above it are empty (4 height units), there is nothing below or to the sides and the air is cooled to 25°C currently. Also the table states that the FLEX200 isn't suited for rack mounting, though it comes with rack mount brackets included… Talking about…

Generally a boat battery without any inbetween electronics surely is a TERRIBLE powersource for something like an access point! It will swing in voltage due to load and may also be subject to overvoltage due to motor ripple / EMF feedback. So since the APs only offer minimal ripple- and noise electronics (as in: the…