Zyxel_Nami  Zyxel Employee

Hello @Volker Thank you for your constructive feedback you provided. We will monitor this idea and take it into consideration for future updates to enhance the user experience.

Hello @TinusW To better assist you, could you please confirm if your network setup is as follows: Internet → Modem → AP 01 → (Mesh) → AP 02 → (Mesh) → AP 03? And please let us know which AP the end device is connecting to when facing slow speed on the 2.4GHz SSID. Additionally, please be aware that in a mesh network, the…

Hello @merasil We've replicated the issue you're experiencing with the NWA50AX Pro's web GUI when connected to its non-management VLAN's SSID. Our team is currently investigating the root cause and will update you as soon as we have more information. We appreciate your patience as we work to resolve this matter.

Hello @AndyFish Please keep the discussion on the following post: https://community.zyxel.com/en/discussion/20587/nwa50ax-pro-nwa50ax

Hello @AndyFish I noticed that you've created posts with the same content regarding the NWA50AX PRO & NWA50AX connection status issues. To keep the discussion streamlined and more effective, let's focus our conversation on one thread. We will continue our discussion on the following post:…

Hello @AndyFish I've reviewed the status of your site and noticed that the 3 APs have been consistently online since 19:00 (GMT+8) and remained stable until my last check. To ensure that everything is functioning optimally, could you please confirm if the issue you were experiencing has been resolved? If there are any…

Hello @AndyFish Please check the Cloud Control Status as below screenshot and share with us. Below is the FAQ for your reference: https://community.zyxel.com/en/discussion/15161/how-to-check-the-cloud-control-status-when-ap-is-offline-on-nebula Besides, please check your firewall rule or ISP whether they allows below…

Hello @aks Thank you for the details you've provided. We've replicated the issue where an additional year is included in the VRPT log format. It will be resolved in a future firmware update.

Hello @pkarthikkn After switching to "load balance", have you noticed any improvement? If i don't connect the 1st port to my LAN on pfsense, there is no internet available ⇒ When you unplugged the LAN connection (from the pfSense router's LAN port to port 1 on the switch), did you also remove VLAN 1 from LAG2? If so,…

Hello @merasil Thank you for sending over your configuration file. We've successfully applied it to our test device and the web GUI access for the NWA50AX Pro is prompt. To help us better understand the slow performance you're experiencing, please provide a video recording of the issue. Are there any specific pages…

Hello @merasil To assist you better, could you please confirm if the SSID configuration of the NWA55AXE, which your laptop connects with to access NWA50AX Pro's Web GUI, is the same as the SSID configuration of the NWA50AX? Please let us know the firmware version your NWA50AX Pro is running. For a more in-depth analysis,…

Hello @saltet The WLAN Rate Control Setting is a feature that allows users to configure the transmission rate of their Access Point (AP). This feature is useful for limiting the transmission rate of clients connected to the AP, which can be helpful in optimizing your wireless network performance. For more detailed…

Hello Michael @MBuerkel, On the RT600AX I currently assigned the network "Server (VLAN1)" to Port 1. But then, I can't use the Port as a trunk port. To make port 1 a trunk port, I have to delete the assigning of VLAN1. Have done that, but then, the GS1200-8 isn't accessible anymore. The network devices attached to the…

Hello @ncritchley For the GS-108B v3 switch, there isn't a specific uplink port. You can use any of the 8 ports to connect the switch to your broader network, such as a router or another switch.

Hello @pkarthikkn I hope all is well. If you use LAN for the management VLAN, you can also configure LAG 2 as a non-member of VLAN 1 on your GS1200-8 switch. This can also solve the potential conflict between the LAN and LAG connections as mentioned earlier.