Best Of
Re: LTE7480-M804 loses connection and stays disconnected until next reboot
@jdawg69 no solution yet.
So many routers have a fail check, where you can reboot the device if X pings fail one after the other. It's a shame this one has no solution.
I wish I had root access to the router to make a script and solve this myself.
It looks like returning the product is the only way, will do that after the holidays.
So many routers have a fail check, where you can reboot the device if X pings fail one after the other. It's a shame this one has no solution.
I wish I had root access to the router to make a script and solve this myself.
It looks like returning the product is the only way, will do that after the holidays.
nicosemp
1
Re: device already registered
Hello James, I fixed it. The problem was the browser. Using Safari the autocomplete page did not open; I repeated the operation with Chrome and it worked. I'm posting it to help some other users. Thanks for the support.
Re: Quick HowTo for a VPN Connection to a Phone and W10?
In Quick Setup > Remote Access VPN Setup, select one of the scenario to configure remote access VPN on wizard.
L2TP VPN
How to setup L2TP VPN for remote access
Note: Android 12 and later versions do not support L2TP VPN. Please use IKEv2 instead.
Note: Android 12 and later versions do not support L2TP VPN. Please use IKEv2 instead.
IKEv2
Re: Nebula tunnel gets rebuilt every 30 seconds
Hi Chris,
Seems to work now fine, thank you very much for the clarification. Have a wonderful weekend! :-)
Seems to work now fine, thank you very much for the clarification. Have a wonderful weekend! :-)
Peppino
1
Re: Turn ON Respond to ICMP (PING) USG FLEX 700
I did get a reply fm ZyXEL TS. Here it is:
I'm under USG FLEX > Configure > Firewall > Security Policy here are the fields to fill in for ICMP protocol on the WAN ports
Name: PreFilled w SF_: SF_ICMP
Action: Allow
Application Patrol / Content Filtering Policy (PRO): As this is a PRO feature I suspect I could leave this BLANK Yes, BLANK
Protocol: ICMP
Source: Any
Destination: Device
Dst Port: Any
Schedule: Always
Description: Free text field
That turned on PING response on both WAN ports. It is recommended that you narrow down the Source from Any to specific IP addresses so you don't respond to any source that pings your IP.
I'm still looking for where this is all documented. I would rather read about it and try and learn it than contacting TS.
Hope this helps someone.
-stew
I'm under USG FLEX > Configure > Firewall > Security Policy here are the fields to fill in for ICMP protocol on the WAN ports
Name: PreFilled w SF_: SF_ICMP
Action: Allow
Application Patrol / Content Filtering Policy (PRO): As this is a PRO feature I suspect I could leave this BLANK Yes, BLANK
Protocol: ICMP
Source: Any
Destination: Device
Dst Port: Any
Schedule: Always
Description: Free text field
That turned on PING response on both WAN ports. It is recommended that you narrow down the Source from Any to specific IP addresses so you don't respond to any source that pings your IP.
I'm still looking for where this is all documented. I would rather read about it and try and learn it than contacting TS.
Hope this helps someone.
-stew
ivessm
1
Re: unable to register my newly purchased device
Hi @prakash
You can login to Myzyxel.com portal on your browser first.
And then kick hyper link portal.myzyxel.com at Configuration > Licensing > Registration page.
Browser will redirect device registration page to you. (Serial number and MAC Address will auto field)
After clicking submit, device is able register to your account without problem.
You can login to Myzyxel.com portal on your browser first.
And then kick hyper link portal.myzyxel.com at Configuration > Licensing > Registration page.
Browser will redirect device registration page to you. (Serial number and MAC Address will auto field)
After clicking submit, device is able register to your account without problem.