Best Of

Re: Wireguard?

I agree - wireguard support would be fantastic. After using openvpn for quite some time, the ease of use and flexibility of wireguard is just fantastic. I very much support this idea.

sgwatts

2

Re: NWA90AX connection issues with second and third SSID

Hi @IdWaxDat,

Have you checked whether there is space or special character in the password of SSID2 and SSID3? Because stations can connect if no shared key required, so we’d like to clarify whether stations could not connect to SSID because of password typo.

Regards to there is no Internet when station connect to SSID2 and SSID3, please:

1. Check if the SSID2 and SSID3 are using the correct VLAN ID. Go to Access point > Configure > SSID advanced settings > select the SSID2 and SSID3 > edit VLAN ID

2. Check if the switch port that AP and gateway are connected to has configured the corresponding VLAN settings.

3. Check if the gateway has configured the corresponding VLAN interface.

Please let us know the result here after your checking. In case the issue still happens, please:

1. Enable customer’s Zyxel support by going to the left sidebar > Help > Support request > Invite Zyxel support as administrator, save the changes for us to check.

2. Please share your network topology, so we can understand how you connect your network devices and clients.

3. Provide the station MAC, connected time, the SSID and the diagnostic file after the issue happens via private message. We’ll send message for you, so please pay attention at your forum inbox.

The path to collect diagnostic file: WEB GUI > Maintenance > Diagnostics > Diagnostics

Zyxel_Judy

1

Re: XS1930-10 DHCP Server

Hi @nox79,

Thanks for sharing your idea.
Could you share why you need this feature and your scenario?

Zyxel_Melen

1

Re: Event Viewer RAS Error 720 connecting to a L2TP VPN (Windows)

These steps have been taken for solving the issue:

Verified every parameter of the VPN connection (LCP extensions, MS-CHAP v2 enabled, disabled IPv6 and Windows client on the connection, Pre-shared key)
Diagnosed the status of the system via shell command "sfc /scannow" (no error present)
Verified this article for troubleshooting Error 720 on Windows

According to the problem I managed, the issue was related with WAN Miniport (IP) driver/network card. I solved applied "Scenario 3", removing "WAN Miniport (IP)" card on the PC and requested "Scan for hardware changes". This operation reinstalled the virtual network card and solved without reboot my problem.

However: your mileage may vary (AKA: does not mean that removing the "WAN Miniport (IP)" is the correct solution for you), so take care to fallow all steps for diagnose that Microsoft propose.

mMontana

1

Re: How can i turn on my NAS 326 remotely

Long shot. Are you using the other network port on the NAS now? That has another MAC address.

Mijzelf

1

Re: NBG7510 setting IP in Access Point mode

Hi @Zyxel_Kay,

Finally I had time to check this and indeed the new firmware works without any errors and I can now manually assign IP while in AP mode. Thank you for your help.

Andy

sLOVEnec

2

Re: USG Flex 200 URL Blocking log

Hi @Vagabound, and @raph_soc,
Both URL https://e1.o.lencr.org and https://ocsp.pki.goog/ are in correct category now.
As for URL https://x1.c.lencr.org, it is still in Phishing category, we are working on it.
It may need to take 3-5 business days, will update status once it is in correct category.

https://ocsp.pki.goog/

Image: https://us.v-cdn.net/6029482/uploads/editor/bi/wiohjb8lzk6m.png

https://e1.o.lencr.org

Zyxel_Cooldia

1

Re: USG Flex 200 URL Blocking log

I will do this as soon as I get a message from the support to solve the problem. Unfortunately, I have not read anything from support for three days. Seems to be a complex problem.

Vagabound

1

Re: NR7101 Firmware V1.00(ABUV.7)C0

@SELBERG you mentioned that you have the issue that you can't login at some point to the interface despite the username and password being correct. i had the exact same issue yesterday evening. been testing the latest version since sunday with a daily reboot at 2am.

this morning i noticed i have no wan link and suspected the zyxel.

i checked my routers log and the reboot took place according to my logs at exactly 2am.

i received new ipv4/ipv6 address (pass through) but exactly 3h 40mins later the link to my zyxel died according to the logs. no ping reply from zyxel. tried to refresh dhcp to receive new ipv4/ipv6 address from zyxel without luck. i had to power cycle to get it working again.

i will test it one or two more days but imho, this version 7 should not be considered stable.

BrandSafway

1

Re: USG Flex 200 - Firewall by WAN

Just an Idea, maybe a Policy Route will also work ,but you would have to configure this for every Subnet/Interface as the Source.

Image: https://us.v-cdn.net/6029482/uploads/editor/l9/jwo170w42qfd.png

FelixSchneider

1