Best Of
Re: Turn off QOS on switch GS-108S v2
Unmanaged devices work “as shown” and cannot be configured.
If you want to “configure”/"edit"/"modify"/"do what i want" things you should buy managed/configurable devices. But… beware of what you buy and how you configure it 😉
Re: Turn off QOS on switch GS-108S v2
You can't but really it should not cause problems if needed look for another switch like GS1100-16
Re: SSL On Android
Hi @JCE ,
Greeting Forum, there is currently no SSLVPN client for Android. Please use Ikev2 or L2tp over Ikev2 as an alternative.
Also refer the following topic:
Remote Access VPN Wizard for SecuExtender IPSec and Non-SecuExtender IPSec VPN Clients
Thank you
Re: Outbound Traffic from an Internal Server not Routing Through Correct External IP
When inbound traffic comes in and you NAT to the server the ATP knows to use the appropriate external IP or else it will fail.
As for outgoing traffic the ATP SNAT by default on the WAN IP interface so the only way to SNAT out a given WAN IP is by a routing rule.
Re: USG 20VPN web interface Blocked
As I mentioned, the CLI command can show the NAT profile and disable it.
Router# show ip virtual-server
This command will show all the virtual server profiles, and find the profile name of the rule you edit.
Router# configure terminalRouter(config)# ip virtual-server deactivate <profile_name>
This command will disable the specific virtual server profile
Re: Zyxel nwd6602 5g network do not apper using android 5g acces point
Can you see other 5G SSID with your NWD6602 adapter?
Maybe the adapter could see other SSID but not the Android mobile SSID.
Re: USG 20VPN web interface Blocked
@Pedro_Brito USG20-VPN have in the box the cable for console access. Consider this as opportunity to revert/disable your NAT setup. Won't be fast & easy, but might save you to reconfigure the whole device.
Re: Feature Request: XGS2210 support to Change IGMP Query Interval
May I know is there any service impact if the switch is unable to change the IGMP Query Interval?
Re: NWA220AX-6E vs WAX620D-6E difference ?
Hi @tremor,
In addition, there are differences between Operating mode and Conducted typical transmit output power.
1. Operating mode:
NWA220AX-6E: Nebula Cloud managed/ standalone
WAX620D-6E: Nebula Cloud managed/controller-managed/standalone
2. At 5GHz, the output power of WAX620D-6E is bigger than NWA220AX-6E 3dBm.
To get the full spec, please refer to these datasheets: