-
Recover DD-d partition info
Dear all, I have unfortunately deleted my sda partition info with (dd if=/dev/zero of=/dev/sda) when I wanted to repair my SD Card partion table in sdb. :-( Right now system is up and running, but if I lose power, perform restart -->everything will be gone. I do not have backup possibilty of the total NAS content. If…
-
NSA325 v2 backup is very slow
Hello everyone,I' m using BackupPlanner to backup a NSA325v2 to an external hard drive. The hard drive is plugged into the USB 3.0 port, but the speed is nowhere near what i would expect from USB 3.0. Sometimes the backup takes longer than a day. During the backup the CPU is constantly at 100% with 2 zysync processes using…
-
Twonky configuration on read-only diskpart
Hi, I want to change the view-definitions.xml file of Twonky media server, which I could in the past. However after the latest firmware upgrade or because of a new install after a disk upgrade, it's on a read-only file system. Direct editing or copying back and forth is not allowed now. How can I make it read/write or in…
-
Is it possible to use NSA325v2 as VPN server?
Hello everyone, I am currently still running two NSA325v2 and although they are older models I hope some here still love them the way I do :) I am currently abroad for work and would like to be able to access German website the way I could from home. Geocaching etc. is making a few sites unavailable to me. Is it possible…
-
How to install Plex on NAS520
I’ve been scouring these forums for a way to install plex on my Zyxel NAS520 but I haven’t been able to find any methods that seem to work. I followed the steps laid out in this forum: https://homeforum.zyxel.com/discussion/448/plex-tv-for-nas326 but unfortunately it would seem that it no longer works. Any assistance would…
-
NAS326 problem with remotely access and UPnP
Hello. I have not remotely access to my NAS. My brother have router 192.168.1.1 and I connect my router (192.168.2.1) by LAN (subnet). NAS is connected to my router (local ip 192.168.2.XXX with gateway 192.168.1.1) and its work fine in local. I set DDNS on myZyxelCloud but if i use MYNAME.zyxel.me in browser that open site…
-
Grafana & influxdb
Hello, is it somehow possible to install Grafana and InfluxDB on a NAS540? If so, can someone please explain how to do? Thank you! #NAS_Feb_2020
-
How to configure Samba share to sort alphabetically?
Hello, I have a NAS326 and I have some devices that cannot sort alphabetically on clients end. I need to configure need the NAS326 to sort alphabetically. I tried to edit the smb.conf, but it didn’t work. #NAS_Jan_2020
-
Does anybody know of a HTTRACK version for Zyxel NAS?
Hi everyone. Is there a copy of HTTRACK that will work on a Zyxel NAS, e.g. NSA325v2? I would like to create a local copy of a website and unfortunately wget will create useless filenames despite using the --content-disposition option. I found DarcyRipper and HTTRACK and both work but neither seem to be available for our…
-
Re: Debian/OMV on NAS540 gone wrong?
-
NAS326 installing
Hey.I have a NAS326 which I installed but did not wish it to, then suddenly the router did not find NAS326.The HD lights are blinking but the IP address is not visible on the router so I cannot access the NAS326 menu.I reset the router but did not help.Any ideas for what to do?Regards Kauko #NAS_Feb_2020
-
Paring NAS520
Hello everyone. Need your help. I have NAS 520 more than 2 years. It is connected to my home router via lan cable, so I can access it from my PC. Now I want to pare it, and when I click to paring button nothing happens ( I think it is restart button? ). Also, I dloaded Zcloud app for Android, but what address I type there?…
-
FFMPEG not working on NSA325v2. Did I install it wrongly?
Hi everyone, I wanted to install ffmpeg, but it seems I am doing something wrong. I ran slacker -Ui and then installed ffmpeg. But I cannot run ffmpeg in shell. It is not being found. I have ffp and entware-ng installed next to each other, if that matters. <code> sudo find . -print | grep -i 'ffmpeg*'…
-
HTTPS and Certificate
Hi there, I think I need your help: I configure a little with the connection "HTTPS only" and the certification and now I do not get access to the web interface. Is there a way to disable HTTPS and use normal HTTP using SSH command? Nas520 Thanks for your help! #NAS_Feb_2020
-
NSA325 log emails generate error
I have set my NSA325 to send a weekly log email to myself. Every such email is being sent to the SMTP server, but is bouncing back with the following error report: ________________________________________________ This is the mail system at host forwarder.cmp.livemail.co.uk. I'm sorry to have to inform you that your message…
-
nas325/nas326 tcp/ip network settings
I made in the beginning a manual setting of the tcp/ip and like to change this to automatic, but this is not possible. How can ik change this?? #NAS_Feb_2020
-
nas325/nas326
Is it possible to set the nas to the factory setting without losing the data on the (2) hdd? #NAS_Feb_2020
-
NAS 326 Twonky shows one file in all directories
Hi I 've been using NAS326 and Twonky for over a year. Yesterday found that Twonky began to show in all directories one file, this is true for both video and music.Tried to clean the fully scanned directory and fill it a little bit. Scanned the content and reset Twonky. The problem has not yet been solved, how can this be…
-
NAS540 cant install apps
i recently had a broken harddisk (not for the first time) so i took the nas out of business for a few days until replacement arrived, and replaced the broken disk, all went fine (except for the lack of speed doing the resync, but one gets used to it) When the arrays where in sync again i wanted to connect to my nfs shares,…
-
certificate problem
I've forced the system to accept only https connection, but the certificate is not valid. I've followed the procedure to create this certificate, but now there's no way to enter in the config page through the Starter Utility...Can I roll back this state? Thank You #NAS_Feb_2020
