-
NSA Starter Utility EOL Announcement
NSA Starter Utility EOL Announcement Zyxel Networks has announced that the service below is in the process End-of-Life (EOL). Zyxel
Networks announces that the service below is in the process for End-of-Life
(EOL). EOL Service: NSA Starter Utility for NAS326, NAS540, NAS542 End of Service Date: 29-July-2022 Alternative…
-
[Important Announcement] End of FTP Service Support for Home NAS Series
This discussion has been moved.
-
FFP not starting after reboot on NAS542
Hello Community, I have some experience with my NSA325-v2 NAS, including FFP install and configuration, and I just started to work with a NAS542. Metarepository and FFP setup was successful with some tricks (disable default zyxel ftp source in metarepo cfg, etc.), but realized that after rebooting the NAS, the configured…
-
Last stock firmware version (V5.21(AASZ.5)C0) for NAS520 wanted
I would like to reinstall the latest stock firmware for NAS520. V5.21(AASZ.5)C0 Where can I download this file. Zyxel doesn't offer download links for EOL devices.
-
NAS542 bootloop after Debian/OMV (get a new firmware) (solved)
I was 2 years on the Debian/OMV on SD-Card.Now i saw new images from SCP here:http://seafile.servator.de/nas/zyxel/ I wanted to switch back to original firmware first with: sudo /firmware/sbin/info_setenv next_bootfrom 1Since then i have a bootloop, no matter with, or without SD Card. Afer a little bit fiddling i got a…
-
NAS 542 Firmware V5.21(ABAG.14) new Shared Folder name restrictions
I recently updated my firmware to the latest available version (after rolling back due to a reported issue with the .15 version causing the NAS to no longer boot). Now, as I was inspecting some settings I noticed that one of my shared folders is marked as invalid due to it containing a ' in its name. This was not the case…
-
Backup and restore a Nas326
Hi, I have a NAS326 with two 2tb drives in basic mode and I'd want to create one single volume in raid 0 and restore all my previous data and configuration. I'm doing now a complete backup of both internal drives on a 4tb external drive using Backup Planner. Can I then restore all my data from that to the new raid 0…
-
Nas520 firmware
Hello! Tell me if it is possible to update the firmware of nas 520, recently caught "chekmate" security has not been updated for a long time! Maybe install the firmware from the nas 542 model, do you think this is possible? How can you protect nas from the likes of the "chekmate" cryptographer.
-
Has Someone Firmware Ver.V5.21(ABAG.15)_myZyXELCloud-Agent_0106
Hello All Can someone help me to find/download firmware version Ver.V5.21(ABAG.15)_myZyXELCloud-Agent_0106 maybe if i have that i can get my NAS back online, i get the impression that nothing else will work. Thanks a lot in advance Paul Moolenaar
-
NAS326 Mijzelf repo issue
Hi! I installed Mijzelf repository on my NAS326 but there are only 2 softwares to install: -Transmission -My ZYXELcloud-Agent Where are the other programs?
-
I don't have any app to download on App Center (NAS326) (SOLVED)
I'm new on Zyxel Nas326. I'm trying to connect nas to myZyXELCloud. I can't install the myZyXELcloud-Agent application because it doesn't appear on the App Center like any other app. When I press the "Retrieve List From Internet" it shows "Download List Fail". I've test the internet connection and it shows "success". I've…
-
Nas326 password reset
I have lost my login informations. I tried to login via LAN to my Nas but it only says that username or pasword is incorrect. How can I reset password. I found some guide which told to press reset button 3 second. Would this work and can i be sure that my photos are still in safe? Please help. #NAS_June
-
nas326 download list fail
-
Latest firmware for NAS542
I purchased a secondhand NAS542, which is running V5.21(ABAG.13). I discovered there is a ABAG.14 update that fixes several vulnerabilities: https://www.zyxel.com/global/en/support/security-advisories/zyxel-security-advisory-for-multiple-vulnerabilities-in-nas-products-06-04-2024%2C however the link to download the…
-
Cannot login to admin console after restart (542)
So my NAS has been working perfectly but I had to turn it off for a few seconds…So I did that by pressing the power button and then turning it on again with the button… I thought everything looked and sounded normal when it started back up…When I put in the IP address for the NAS in Chrome the admin console shows up as…
-
Sharing is disabled and trash cans are turned on.. Samba replacment?
I have a 325 and the problem is that the shares on the second hard drive keep disconnecting and the recycle bin is activated. I suspect it's somehow related to the Samba replacement and wanted to reinstall it, but unfortunately, the command /opt/bin opkg.update command not.found returns "I'm logged in as root." Does anyone…
-
NAS 310 & 320 NAS Starter Utility and firmware needed
I have a NAS 310 & 320. Please send me the link or files to download the NAS Starter Utility and last firmware for these units. Thanks
-
Can't log in the wheel just spins
One of my raid 5 drives failed. I powered off the NAS540 and replaced it. After I power it back up I can't log in. I get to the login screen and the wheel just spins forever. I even tried a factory reset so it's back to the default username and password but still I never get past the spinning wheel. Any idea how to get…
-
NAS326 desktop unreachable
I have 2 NAS326's on my local network. Until a few weeks ago I could reach the desktop using the IP address in Firefox for each of the devices. Now, I can easily reach the first 326, but the other gives me the message "Problem Loading Page. Unable to Connect. Firefox can’t establish a connection to the server at…
-
Latest firmware for NSA310S
Hi, I am looking for new firmware for my NSA310S, But I can only find firmware for other models.. What do I need? I'm using V4.75(AALH.2)
-
Long estimated time to sync additional drive in NAS
The estimated time is still showing +100 hours to sync drives after about 20 minutes of running; I have less than 1.5TB of data to sync. I am in the process of adding an additional drive in RAID1 in nas326. That timing doesn't sound right - I am not doing anything else on the NAS. I went to the manage storage option>…
-
nas 326
Most of my files appears with the extension .l0ck3d and they don't open. How can I change that?
