-
FLEX500: Match default rule DNAT Packet, DROP
Hello, Can anybody explain that type of log like below:? Match default rule DNAT Packet, DROP source: 192.168.100.12 --- dest.: 192.168.100.1 I haven't any NAT service to that subnet configured.I have one NAT rule but destination address is in different subnet (different vlan)
-
Does the USG FLEX Series have Port Forwarding problems?
On 06/27/2022 I opened a ticket following the replacement of a USG 40 with a USG FLEX 100 for a problem related to the Backup of a Synology NAS to another Synology NAS via the Hyper Backup application. To perform the backup you need to redirect only the TCP port 6281 to the destination internal NAS. This configuration has…
-
Zywall USG 1100 unexpected reboot.
Good day. Today we caught new unexpected reboot. Our ISP has problem on router, so WAN connection connect/disconnect many times in row with linked up/linked down status. Device goes to kernel panic some times. Debug log in attach.
-
Is there any EOL schedule for zywall usg series?
Can I use USG40, USG 110, USG 310, USG1100 at 5 years later? How long does zyxel support security license for usg series?
-
USG 200 WAN with 2 Networks/VLAN
Hi, my provider send me some information how to connect by FTTH. I am using an older USG 200 Security Gateway. I need to connect by pppoe without any vlan id to use internet. I am using wan1. This works great! To use voip i need to setup a second connection on the same wan interface (wan1) but with vlan id 2222. How can i…
-
VPN dashboard wrong (5.32)
The device has 4 VPN Gateways two are site to site, client role. Two are dynamic peer to site, server role.4 connections are setup.One up and running, other three (with related gateways) are disabled and unconnected.Neverthless...I have a "top 5 DPD fail" and "top 5 connectivity fail" for disabled gateways and connection.…
-
Manual for ZyWALL USG 100
Someone who can help me? I need a manual for ZyWALL USG 100
-
Register ATP500 without Services
HelloWhy is it that when I register a new firewall, immediately alle Services are registered as well and the subscriptions are activated? I am pre-configuring this firewall because I only have time now. However, the firewall will be replacing an old one only on december 22nd, not before. Also the customer first wants the…
-
AP country code removed from 4.x wireless controller?
Moreover... When?Page 292 of the user manual, date 11/11/2021.
Copy and paste.
9.1.1 What You Can Do in this Chapter • Use the Controller screen (Section 9.2 on page 292) to set how the Zyxel Device allows new APs to connect to the network and set the country code of APs that are connected to the Zyxel Device. Device…
-
Trouble with an old USG100-Plus after updating to WK48
Hi everyone! Today I tried to update an old USG100-Plus up to latest wk48 firmware(via web), but get a brick instead the firewall. Then I tried to restore it in debug mode, with cli/ftp, but devise cant uncompress image with firmware: Firmware received ...Start to check file system...Done Building ... [Update Filesystem]…
-
ZyXEL VPN300 VLAN on MRTG
Hi, I have run MRTG on ZyWALL 110 and it is able to capture my VLAN interface and monitor the interface usage. But when i setup the same on ZyXEL VPN300, it is unable to find this interface. Anyone know how to resolve this?
-
USG20 firmware update
I installed firmware 5.3 to update the original version, 12 hours have passed and it continues to update, right now I can't see which version is installed because whenever I enter the router through the browser it gives a timeout error, any ideas?
-
Released firmware vs Lab firmware
I'm gonna deploy USG Flex 50 soon. Currently both images have 5.32 firmware.However, WK41 firmware is available.Device will be "client" for a IPSec VPN; should not provide as default any kind of remote access. Which is best use as firwmare? Official 5.32 or 5.32 WK41 (I am aware that both are supported, but i had issues…
-
ATP200 firmware update impossible
I have an ATP200 with the following fw versions installed in the flash: Upgrade of any of these banks is impossible since either trying over FTP, or HTTP, after the upload of 532ABFW0C0.bin is finished, the serial console drops a Firmware not compatible! message. Can you please advise how can I overcome this situation?
-
unable to update service on USG40
hi, i try to update license service on my usg40. When i click on "service license refresh" nothing is happening.after investigating i noticed that the router does not resolve and ping any addresses.I have already set the google dns on the page to dns forward wan1 but nothing changes. on the lan side all clients browse and…
-
No email report from USG200
Hi support, I have a USG200.I would like to get a daily email report from my USG.I copied pasted my google credentials from Firefox to the configure email daily report page. Unfortunately, when I click on the "Send report now", nothing is received and nothing is the send mailbox folder.What's wrong, is it a bug? Is there a…
-
PRIVATE NETWORK ATP 200
Dear, Can you tell me how should I configure so that a specific device is blocked from connecting to the internet, only allowing that device to have its connection on the local network? Should I create a user and assign the IP of the specific machine to block its access to the WAN? Would it be something like this? I only…
-
My experience on 5.32 firmware starting from scratch (on premises)
As 2022 is... quite few years that i use Zyxel firewalls. My first experience was Zywall 5, and now on a USG Flex 50 maybe is the 50/60th device I use/configure/manage.Latest experience was USG Flex 100 starting from scratch at the beginning of the year, but starting "as new" give me some more insights about the "new…
-
Is there a configuration converter that will work for Zywall 110 (firmware 4.38) to ATP200?
Getting Ready to upgrade customer from Zywall 110 to ATP200. Is there a configuration converter available for this?
-
Resolving hostnames between different interfaces
I own a USG FLEX 100. On Interface1 I have LAN connected PCs.... on Interface2 only the WiFi clients. All works great and I can ping clients from different subnet without problems, but I cannot resolve hostnames... only IPs. Hostname are reachable only inside the same subnet. Could someone help me configuring this? Thanks…
