-
FDB on XGS1210 & XGS1250
I really would the like to be able to examine the Forwarding Data Base of mac-addresses on my XGS1210 and XGS1250. When trying to solve network problems, this can be essential, and since the data is already there, it should be easy to display it in the web i/f.
-
XGS1210-12 - Enable 10Mbps link speed on the 2.5GbE port 9/10
Can we get a firmware update to enable a 10Mbps link speed on the 2.5Gbps ports 9 & 10 on the XGS1210-12? Reason: An Intel NIC refuses to negoiate above 10Mbps when the computer is turned off (S5) because Intel have refused to do it (WOL issue with I225-V (3)). This means no link can be established while the machine…
-
GS1200 Series switch status LED can be disable
Based on a suggestion from user @Tissi_2 , we would like to propose the implementation of a feature that allows users to turn off the status LEDs on the GS1200 Series switch. This topic was raised in the following discussion: Turn off Status LEDs — Zyxel Community If anyone likes this idea, please feel free to leave a…
-
Feature Request: GS1900 series switch support import certificates feature
User @christ0815proposes that * GS1900 series switch support import certificates feature If anyone likes this idea, please feel free to leave a comment or click vote. In addition, anyone who urgently needs the import certificates feature can consider the GS1915 series switch.
-
Distinguish between unused and disabled ports on the dashboard port status in switch V4.80 firmware
User @icelander proposes that Switch V4.80 Firmware can make a minor enhancement to distinguish between unused and disabled ports on the dashboard port status. If anyone likes this idea, please feel free to leave a comment or click vote. Original post
-
Port Counter overview of all ports of switch in one overview
At the moment in the the port counters can only be viewed per port (GS1900-8, V2.70(AAHH.5) | 02/08/2023). There is no possiblity to view all ports at the same time in a total overview. It would be very handy to see the load of all the switch ports in one page. 🖐️
-
view error counters on XGS1210-12
For debugging purposes it would be very helpful if interface error counters would be accessible from web access.
-
Feature request: Change switch's default management IP address
User @mMontana proposes that Change the switch's default management IP address to avoid IP conflict. If anyone likes this idea, please feel free to leave a comment or click vote. Original post
-
XMG1930-52HP
We're now using since 2 years NWA210AX with 2.5 Gb RJ45, our pc's for designers have already 2.5 Gb network and our latest series of desktoppc's for simple officework now also have 2.5 Gb standard. While our servers standard come with 10 Gb, we are now simply bottlenecked by the switch (currently using XGS1930-52HP). The…
-
POE++ IEEE 802.3bt Type 4 (High Power POE)
I was hopeful the XGS2220-HP switches would have high power 90W POE++ ports (IEEE 802.3bt Type 4). They are only Type 3 60W :anguished: I work in the Audio/Video production industry and we're already seeing transport sources requiring POE++ type 4, such as Sony FR7 PTZ Camera…
-
Readable config file for XGS1210-12
We have received a request from user @muetzekoeln for a readable config file for the XGS1210-12. Also, we realized that for some reason esp security concerns, the ability to read config file is necessary. Please see the thread here: https://community.zyxel.com/en/discussion/16412/xgs1210-12-config-file-unreadable Nami
-
Feature Request: XGS2210 support to Change IGMP Query Interval
User @bseizproposes that * XGS2210 support to Change IGMP Query Interval If anyone likes this idea, please feel free to leave a comment or click vote. Original post
-
System Uptime on XGS1210-12
During our investigation and testing of the issue encountered by user @Fuli, we realized that the 'System Uptime' function is necessary for identifying the problem. The LAG configuration is lost after the switch reboots, but we have no way of knowing when the reboot occurred because the XGS1210-12 switch does not have a…
-
LED display
In order for users to be able to easily identify the speed of connection, user @ahorner proposes that the different colored LEDs or indicating the link connection on different sides of the ports can be implemented, for example: LEDs on the right side showing 10M connection, left side would be 100M, and both sides would be…
-
Feature Request: GS1915 series switch can disable the LED
User @screwdriver proposes that GS1915 series switch can disable the LED If anyone likes this idea, please feel free to leave a comment or click vote. Original post
-
Mac Table new column "Name"
Hi, its possible to implement in XS1930-10 in the option MAC table a new column to assign a name to mac address? This way its more easy to find and associate devices with their mac adress. Something like this. Regards
-
Managed 24 port 2/5 or 10gbit switch fabless or low noise
I’m already waiting a few years for a decent 10gbit switch with basic management function in a fanless or very low noise design. The only thing you find is those enterprise switches which sound like an airplane I would expect with the introduction of wifi6 and 2/5 gbit that some decent 24 port switch would be available in…
-
XS1930-10 DHCP Server
Hi, can be really great if can be implemented in XS1930-10 DHCP server on it. Regards
-
XS1930-10 Anti-ARP
Hi, it’s possible to add Anti-ARP to XS1930-10 switch. I see this thread and it’s a nice idea to include . https://community.zyxel.com/en/discussion/2996/how-to-configure-the-switch-to-prevent-ip-scanning Regards Robert
-
Feature Request: ZON support high resolution monitors
User @AMI proposes that * ZON support high resolution monitors If anyone likes this idea, please feel free to leave a comment or click vote. In addition, if anyone needs an urgent solution, please reference this post.
