This FAQ offers step-by-step instructions for rebooting Zyxel Access Points. Whether you're facing performance issues, updating the device, or making configuration adjustments, this guide will help you safely and efficiently reboot your device. Power Reboot: 1.Locate the power adapter connected to your Zyxel Access Point.…
Understanding Power Supply and POE Behavior for the WBE660S In today's discussion, we'll dive into the crucial aspects of power supply and Power Over Ethernet (POE) behavior specifically tailored for the Zyxel Networks WBE660S device. Understanding these elements is essential for ensuring your device operates efficiently…
Introduction If you need to power on the AP only at specific times, this article explains how to power cycle the AP through the Nebula switch. Using PoE Schedule for Power Recycling Requirement: A Nebula Switch with PoE capabilities is required to set up power recycling for an AP. Configuring PoE Schedule: The PoE Schedule…
WBE660S requires an input through a USB Type C connection. To meet this AP’s specification, the power supply should reach at least 45 watts. For example, each port should have a 15V3A capability. If powered by USB-C, while the power supply is insufficient, the AP will not power on, meanwhile the small LED light next to the…
The answer is yes and the APs will have an RF full power output. However, we don't suggest to use the power adapter without following its specification. Some unpredictable issues migh happen as bellow:1. If the power adapter always provides high power to the AP, it will speed up the power adapter damage ratios. 2. When the…
It looks like you're new here. Sign in or register to get started.