David_Charron  Freshman Member

Unfortunately it's been a long time ago. From what I could remember, it never really was resolved completely and I ended up not using the feature at that time. Sorry

The Multy is connected directly to the Cox Communications modem. There is also a 8 port gig switch connected to the Multy. Fairly simple environment. 

Thank you Bella for answering my question, I will go with the WAX610D and see how it works out. David

After Emailing and speaking with Tech Support, I believe I have it working. I needed to create VLANs and Policy Route Rules and Tag the APs with the new VLANs.

I did, It still seems to issue an IP from what I want to be the private side.

Thanks for assistance on this.

I would need it for a specific user using the Wi-Fi. There is a possibility of this person surfing a "Bad Site".

I will see if I can get some screenshots. Thanks.

So I have been able to track a few people down and performed the procedure, it was still slow 2 out of 3 times. Also found out some new information, it seems that Android phones have the most trouble that it will not even produce the Acknowledgement page, it gives an error on the page. Any thoughts on that? Thanks.

If I can catch someone who is having the issue at the moment, I will certainly perform that procedure.

The page is a one page custom written page with a logo at the top. Once logged in, the speed is fine. I can can try setting it to 5G and see what happens. Thanks. 

It's difficult to say which one they are connecting to because the Band it is set to Concurrent Operation. They were not far away from the APs, but again difficult to say. For my experience, I was close to one with a strong signal. Thanks.

That's where it was. I will make the change to the "allow https" setting as well. Thank you!