- Last Active
Hi, This might be caused by the FTP service on the WAC6103D-I was turned off. If you can access the WEB GUI, please go to CONFIGURATION > System > FTP, and enable the FTP service. If you only have the access of the SSH/console, you can use CLI command to show the status. Router# show ip ftp server status If "active" is no,…
Hi, There is a post which is related with the WDS configuration on Zyxel busniness forum. https://businessforum.zyxel.com/discussion/2466/what-is-the-procedure-to-construct-the-wds-between-the-standalone-aps#latest Please refer to it and observe if it helps. Thanks.
Have you tried to change the cable? I met the similar issue before. After changing the cable line, the issue was gone.
I deployed several NWA1100-NH in my environment. All of them are DHCP clients; however, I did not meet the issue as the spec described. I thought most of the DHCP servers are using broadcast, not unicast. If you meet the DHCP server using unicast, I thought applying static IP address is also a good idea because it is easy…
It is weird that wifi will be down after changing the ssid password. Any special character in your ssid password? You also mentioned "any changes breaks this connection". What's the change?
Hi Kathy, Thanks for your suggestion. There are 2.4G and 5G in my environment at the same time. I tried to adjust the value as you suggested. After testing, the video quality is better than before. I should make a record for this topic for further usage. Thanks.