HouliCrab  Freshman Member

About

Username
HouliCrab
Joined
Visits
60
Last Active
Roles
Member
Points
42
Badges
7
Posts
18

Comments

  • Hi Sir, does it means the performance was good? I think you can contact your local ISP, they will help you to check the root cause of poor performance.
  • Hi Sir, not sure what is "reset" you mentioned, does it means the VMG4927 is keeping reset? However, it seems affecting your usage, I suggest you can contact your ISP again and provide them more detail about the issue which you are encountering, such like your firmware version, configuration, topology, etc..
  • Hi Sir, not sure what is "reset" you mentioned, does it means the VMG4927 is keeping reset? However, it seems affecting your usage, I suggest you can contact your ISP again and provide them more detail about the issue which you are encountering, such like your firmware version, configuration, topology, etc..
  • Hi Luiz, If the TP-LINK's new firmware version did not support EasyMesh. I think EMG3524 and TP-LINK MESH RE305 cannot form a Mesh Network. The Zyxel EMG3524 supports EasyMesh which is following the WIFI Alliance spec. And the TP-LINK MESH RE305 supports OneMesh which is developed by TP-Link. According to TP-link Q&A-Q4…
  • Hi Rebrider, As i know, their design that remove all function, the usb port only the charging function is left.
    in Keith Comment by HouliCrab January 26
  • Accroding to your description "my DSL lights are both green", it means the connection is ADSL(ATM), and since the light is green, so it means your internet connection is accessible, the VPI/VCI value are also correct. If you still encountering any network issue in this case, I suggest you can contact your local internet…
  • @ChiefSavage In order to helping you resolve this issue, please check private message. Thanks.
  • Hi According to my experience, should be check some info to you. Same problem on 3 devices? What kinds of damage? According to my personal experience, if is the device totally shut down and couldn't work, more likely to be a hardward or power issue. If is the wireless performance problem, then might have related to local…
  • Hi yes, you are right that setting it to the 11ac mode better than 11n mode. it you want two boxs solution (only the ap or router provide the WIFI),i also suggest the C3000Z setting to bridge mode and connect with your AP/router via the wire. for sure, you should to call your ISP that will be provide better solution for…
  • Q1: When might this be an issue i.e. must I buy new hardware? no, they just info you used the new protocol. Q2: Will ZYXEL issue a software upgrade to support WPA3? i think you can contact with CTL local about this question, but as i know no plan to support it now.
  • i would suggest to check with local support (your ISP) for details of what you are looking for. 
  • i would suggest to check with local support (your ISP) for details of what you are looking for. 
  • Base on your spec provided, as my experience, the VMG4005 it doable in reason but we don't know any limitation in the CenturyLink network, just like mac address ...etc. i would like suggest to check with CenturyLink support for detail about your plan.
  • Hello, According to my experience, Centurylink dont support USB port function on the C1000Z, this usb port only for Centurylink internal used, if you still have any concern, i suggest to confirm with Centurylink support.
  • please follow below steps: 1. Maintenance-->firmware upgrade 2. chose your FW file and press the upload button.
Default Avatar