Hummel  Master Member

Hi @trigley, Username is admin and you can find the password on the back label.

@oldcelt Did you change the password before? Have you tried to reset the device to factory default settings?

@JF0 Have you tried to fix the channel 36?

@"Peter Tselios" Normally, CLI commands are used for debugging usage,If you want to configure DHCP settings, it is suggested to change the settings via GUI.

@maniana Can you describe your problem with more detail information?

@Cil If you have tried to reset it to default but still meet the same problem, I think you should contact your local support for asking a help.

@Smith88 Do you know what the current firmware version you are using now?Have you checked the back label on your device? There should be the login information.

@"router problems" Do you know what the current firmware you are using now? I think you should check the back label for the login information.

@"Joe West Hull" So it sounds like when the problem happens, your wireless client still connects to the WiFi but it can't access to the Internet, right? Have you checked the GUI via a PC/Laptop when the issue happens? You can check if the WAN is alive or not from GUI. You can also use the Diagnostic page to check the…

@"Joe West Hull" Does the "5GHz drops" mean that all wireless devices show as connected but they can't reach the router like ping to XMG3927-B50A? Or does it mean all wireless clients are disconnected from 5GHz?

@__ap__ Try not to enable Syslog logging in Syslog Setting. ("Log Setting" -> "Syslog Setting" ).In the user guide, it says "The Zyxel Device sends a log to an external syslog server." So if you only want to see the log on the GUI, you don't need to enable it.

@meiru You can check the user guide first. ftp://ftp2.zyxel.com/XMG3927-B50A/user_guide/XMG3927-B50A_V5.13_5.50.pdfChapter 8 Home Networking and check IPv6 related settings.

You can check it in the user guide.ftp://ftp2.zyxel.com/VMG8924-B10D/user_guide/VMG8924-B10D_V5.13_5.50.pdf Chapter 24 Log.

@"Paolo G." I check the UG of VMG8825-T50K but I don't find anything about printer in USB service chapter. Can you take a screenshot of your settings?

@"Paolo G." How do you configure it on VMG8825-T50K?