Comments
-
Here a reference if forget password, https://community.zyxel.com/en/discussion/1558/how-to-backup-running-configuration-if-forgot-password
-
If the client behind NAT, (1) The 1st IKE packet initial from client to VPN gateway will be UDP port 500. (2) The 2nd IKE packet from client to VPN gateway will encapsulate by another UDP port 4500 header to destination UDP port 4500 of VPN gateway. So first, check the firewall rule on VPN gateway is allow access both UDP…
-
Hi @Rhino, Here the KB you can reference, https://support.zyxel.eu/hc/en-us/articles/360001390914
-
There're many steps to configure for that. Here what's I found from Zyxel KB, FYI. https://support.zyxel.eu/hc/en-us/articles/360001390334-Setting-up-a-VLAN-on-a-WAN-PPPoE-Interface
-
On windows 10, if you are using split tunnel instead of forwarding all traffic into the tunnel. The DNS query priority is based on the metric of interface. Here the MS-DOS mode command to show the metric value of all interfaces. c:/> netsh interface ipv4 show interfaces In my example, The VPN interface is "Ethernet 2" with…
-
It's not support. And I think it's same as this post. Give a like vote. Maybe has a chance Zyxel to consider to add this feature.
-
@kaika313 Here what I configure on my ZyWALL 110 to limit user account can only with 1 login.
-
Hi @Sandro44, You can read this article first.
-
Hi @Ben434, Couple settings combined could achieve. Only recommend for small scale network (<=15 devices), acceptable effort to maintain. 1.Configure stable static DHCP IPs for devices Edit the interface of devices located Add IP address and MAC address of devices into static DHCP table 2.Configure domain name of USG On…
-
Hi @lorenaustin, You can setup DHCP option 252 to give the PAC file link. 1.In the interface DHCP server settings, expand the advance section. 2.In Extended Options table, click Add 3.Add DHCP Option 252
-
Hi @Yoz, Since version 4.35 there a web console can connect from GUI. If the log show destination IP is 0.0.0.0, then it's login from physical console If the log show destination IP is 127.0.0.1, then it's login from the web console
-
Hi @krlee52, I think you can manipulate the routing priority on the VPN client. So that the traffic to the same 192.168.1.0/24 will go to VPN interface first than local. And on USG VPN policy select remote server address object (max. 8 entries) instead of a full 192.168.1.0/24 subnet. Here is my Windows 10 as example,…
-
Hi @ Fitness_Bill, The scan result is right for UDP. Since no response packets received. You can refer this article of a well known scan program - NMAP. Table 5.3. How Nmap interprets responses to a UDP probe "Unfortunately, firewalls and filtering devices are also known to drop packets without responding. So when Nmap…
-
Hi @Costas, It's a PPP interface after the IKEv2 dial-up on windows. So that the interface get IP with /32 net mask without gateway. And the routing to remote subnet is add. You can use "route print" command on windows to show the routing table. There is a route entry to your local subnet bind on the PPP interface.
-
Hi @RobertoC, It might be other rules in front of the rule 28 deny the traffic. You can try to move the rule 28 to the first 1 to check if that's the root cause. Ian