Comments
-
WastedYouth, Yes, V1.00(ABCS.9)C0 is the latest official firmware version. Can you explain more information about the LAN dropouts problem? Has any screenshots? What is your network topology? Do you try to disable "StreamBoost" on Armor Z2?
-
What is your purpose? What is your GS1200 firmware version? What is the connection of your network topology? Is possible to share the screenshots of VLAN setting for more clear understand?
-
Which ZYXEL router you have? FIRMWARE version???
-
As far as I know, you only can use Aurora App to watch the stream, or you can download the stream on your mobile phone. https://homeforum.zyxel.com/discussion/243/how-to-download-a-video-from-camera-storage-to-my-mobile-device#latest And if you have Synology NAS or Zyxel NAS, it can backup the stream on NAS. Synology NAS:…
-
I checked GS1200-8's release note, only VLAN 1 can manage/access switch's web interface. Please make sure your VLAN setting.
-
What is the firmware version of your switch? Is possible to share your network topology, screenshot of VLAN setting and where is the connection of your control device?
-
What do you mean that the problem is related to an over used channel multy is on?
-
There is no any option to change channel on Multy App. To my knowledge, Multy X will detect the best channel automatically. Can you share what kind of the problem you meet?
-
The_Marshal, Does device list shows empty, but there are some client connected to MULTY X? Do you try to re-install MULTY APP or reset MULTY X?
-
Please refer to the Quick Start Guide: https://www.zyxel.com/support/download_landing/product/gs1200_5_gs1200_8_18.shtml?c=gb&l=en&pid=20180126103420&tab=Quick_Start_Guide&pname=GS1200-5/GS1200-8 You need to configure your computer IP as 192.168.1.*, when your computer IP and switch has the same subnet, then you can access…
-
What is the model name of your Zyxel product and its firmware version? Can you also explain more detail about your problem?
-
What is your Zyxel product's model name?
-
Hi smrbrts, Could you provide if you did any firmware upgrade action in this period? If yes, may I know you upgraded the AP firmware from which version to which version. Also, is possible to provide the auto-backup and startup-config configuration if they are existed. If you did not do firmware upgrade action, may I know…
-
@martinbaker2727, Can you share which ZYXEL product you have and its firmware version?
-
Can you share the model name of your ZYXEL product?