Skylink  Freshman Member

Thank you Peter for your suggest but why the "Upgrade" button is unavailable (grayed) i have 3 AP (WAC6103D-I), with firware version 6.28, i'd like to upgrade to latest version (6.55?) but i can't understand how…

thank you

any news?

I don't know if the firmware uograde o simply a reboot has worked but.. now it "works better".

Hi, the usage was always very high. I just upgrade the firmware to 4.38 version and now the CPU usage (and Capwap) are "normal" again. I'll check again tomorrow morning when the company is full of clients and the VPN is used. But 2 questions more... 1. loading the new firmware, after 25 minutes I had to turn the firewall…

Done. If I understand correctly, in this way I "close" the physical port of the main switch to accept packets only from a specific ip address that must be associated with a specific mac-address. Good but... But if on a port is connected a switch (in another office) ... I guess I should create a similar rule on the…

yes USG60W

Off topic: Why not Vlans? i'm newbie and i never configured Vlan, and maybe I misunderstood, but I could not share the server files through different Vlan it seems absurd to me and if you confirm to me that it is possible... perhaps I should take it back into consideration.

Thanks for suggest but.. is not possible because the test of devices could be done on wired or wireless network ..and from any desk (where the connections are shared with our PC). The firewall is the only node i should use to manage potential IP conflict.. but i don't know how (and if it possibile).

Thanks for confirming.

Thank you. It works and is exactly what i was looking for. By the way, the CLI command is the only way to run the scheduling, right? I'm asking because I always prefer to have all the settings "under control" and, since I use the Web interface at 99.99%, this element would not be evident in the firewall.

yes, is what Zyxel_Chris_H confirmed, too.

After 2 months, i can confirm that is storing only the 200 last days (as i needed).Now about 20% of free space remains on the USB drive. But I have the feeling that it started to work only after the manual clean of oldest days (ones that were already been stored before my modify. I mean oldest that the 200 days required).

ok, so the days into "log keep duration Settings" for USB storage is the key. thank you for confirmation. what i verified is that... after a manual clean of the days (already stored into the USB) older than the date calculated (200, for me)... the "automatic delete" seams to works. Anyway, today the last stored is the 21…

Thank you @warwickt, IKE log is gone!